Introduction, Attention – Alpha Technologies FlexPoint AX Series User Manual

Page 9

Advertising
background image

9

010-318-C0-007, Rev. G

The FlexPoint AX solution is a simple, modular, cost-effective way to provide local power to
Fiber to the Home (FTTH), cable telephony, or other telecom services for Customer Premise
Equipment (CPE). The FlexPoint AX system can be confi gured as a fully accessible outdoor
powering solution, or as a partial outdoor system that keeps critical items, including the bat-
tery, outside and available to the service technician.

1. Introduction

FlexPoint AX

components (outdoor installations)

Power-Ring: an electrical utility meter base extender. It fi ts between an
outdoor, subscriber-located electrical utility power meter and the utility meter
socket (or base). The Power-Ring Converter can tap the utility power, either
before or after the meter, and comes supplied with the Blanking Plate (see
below).

200A Continuous, 240A Rated
AX-Power-Ring-A

(power tap after meter) — P/N 021-053-21

AX-Power-Ring-B

(power tap before meter) — P/N 021-053-20

320A Continuous, 400A Rated

Distinguished by orange collar and more robust connectors

AX-400ARING-A

(power tap after meter) — P/N 021-053-30

AX-400ARING-B

(power tap before meter) — P/N 021-053-31

Power-Ring Blanking Plate: covers the opening in the Power-Ring when
the Power-Ring Converter is not used.

Cover Plate, Meter Adapter, AX18/30 — P/N 564-931-10

200A Model

320A Model

ATTENTION:

Compatibility Statement -Early Battery Modules with New Power Converters:

Early FlexPoint AX 30Watt 17Ah battery modules (P/N 031-192-20) and new power
converters (P/N 010-318-34 and 010-318-39) are not compatible and if installed together
will result in continuous nuisance AC fail alarms and failed batteries due to an inability
to properly charge deeply discharged batteries. New Power Converters must only be
used with new 30Watt 17Ah battery modules.

New power converters (P/N 010-318-34 and 010-318-39) are compatible with early
18Watt 7.2Ah battery modules (P/N 031-191-20) provided the cable length between
the power converter and the battery module is less than 15-feet and the wire gauge is
18AWG or heavier.

Advertising