Alpha Technologies Continuity Battery Pack - Manual (Page 7)

0320004‐J0 Rev A Page 3
2. Overview of the Front and Rear Panel
2.1. Front and Rear Panel Descriptions
1 Screw Cover To replace batteries, remove the front covers and the screws inside
the covers.
2 EXT.BAT. +/- To the DC terminal of the second (or next) connected battery pack.
3 UPS BAT. +/- To the UPS DC terminal or the next battery pack.
4 DC Breaker 1. Battery Over-current Protection Breaker
2. To swap a battery, put the position of the breaker in “O” position.
If there is a second (or next) battery pack connected with the
battery pack, the DC voltage from the UPS Bat.+/- will flow through
without any interruption to the second battery pack.
5 AC Inlet for Charger AC Inlet for Charger. Optional
1