Alpha Technologies CXPS 48-2T 48V Pos Gnd - Manual (Page 21)

Argus Technologies Ltd. 053-393-C0 Rev A WC
Printed in Canada. © 2007 Argus Technologies Ltd. ARGUS and CORDEX are trademarks of Argus Technologies Ltd. All Rights Reserved. Page 11 of 32
3 Inspection
3.1 Packing Materials
All Argus products are shipped in rugged, double walled boxes and suspended via solid inserts to minimize shock
that may occur during transportation. Packaging assemblies and methods are tested to International Safe Transit
Association standards. Power systems are custom packaged in heavy-duty plywood crates.
Products are also packaged with Cortex. This plastic wrap contains a corrosive-inhibitor that protects the product
from corrosion for up to two years.
NOTE: Rectifiers and batteries are shipped on individual pallets and are packaged per manufacturer’s guidelines.
3.1.1 Returns for Service
Save the original shipping container. If the product needs to be returned for service, it should be packaged in its
original shipping container. If the original container is unavailable, make sure the product is packed with at least
three inches of shock-absorbing material to prevent shipping damage.
NOTE: Argus Technologies is not responsible for damage caused by the improper packaging of returned products.
3.2 Check for Damage
Prior to unpacking the product, note any damage to the shipping container. Unpack the product and inspect the
exterior for damage. If any damage is observed contact the carrier immediately.
Continue the inspection for any internal damage. In the unlikely event of internal damage, please inform the
carrier and contact Argus Technologies for advice on the impact of any damage.
3.3 General Receipt of Shipment
NOTE: The inventory included with your shipment is dependant upon the options you have ordered. The options are
clearly marked in the bill of materials at the back of this manual and on the labels on the shipping containers.
3.3.1 Racks
Consult the packing slip and power system bill of materials to verify that you have the correct number of racks per
your order.
3.3.2 Rectifiers (Purchased Separately)
Consult the packing slip to verify that you have the correct number of rectifiers per your order.
3.3.3 Miscellaneous Small Parts
Review the packing slip and bill of materials to determine the part number of the “configuration kits” included with
your system; e.g., 053-393-20-010 for CXPS 48-2T system with 22RU battery-mount relay rack.
Review the bill of materials (per the configuration kits that you determined above) to verify all the small parts are
included.
3.3.4 Batteries (Purchased Separately)
Verify that you have the correct number of batteries (if applicable). Refer to packing list.
Verify that you have all the necessary parts per your order for proper assembly.
Call Argus Technologies if you have any questions before you proceed: 1 (888) 462-7487