Alpha Technologies PWE-6FT User Manual
Page 16
16
031-259-B0-001, Rev A
2.0
Installation, continued
2.1
Wooden Pole Installation, continued
5.
Mark the hole for the lower mounting brackets. Lift the enclosure off the top bracket and drill
the lower hole. Spacing between holes for enclosures is as follows:
PWE-6FT
18.0” on center
6.
Slide the enclosure back into place over the top bracket. Align the lower bracket with the
hole and secure it with a 5/8" machine bolt, washer and nut. Tighten both brackets until the
flanges seat into the wood.
The enclosure is now ready for the utility connection, power module and batteries.
Fig. 2-1, PWE Series Pole-mount Enclosures (Wooden Poles)
ACI, LRI Options
Utility Power In
Chassis Ground
Cable Power Out
Upper Mounting Bracket
5/8" Bolts
Nut & Washer
Lower Mounting Bracket
Generator Access Port
18"
3/8" X 3/4" Hex Bolt