Associated Equipment 12-1015 Manual - Manual (Page 14)

- 14 -
Model 12-1015 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
To see the help text, press key again on the selected item and it will
display on the screen.
If you need to quit, just press key will go back to the main menu (Fig. 5).
Let say if you need help on “How to operate””, press key in this selection
will get into the display as shown below:
Press key will scroll down to the next page to continue reading the text
(Fig. 13) below.
If you wish to continue help on rest of the item like “Voltage, Battery ratings,
Internal R and LIFE”, press key anytime will go back to the main menus (Fig.
11).
Here just select the item you want with key and then press key will
enter into the display screen with the explanation text.
To exit press key twice will go back to the main menu for you to begin
testing. (Fig.5)
Figure 12
Figure 13
How to operate
Operation:
Engine must be OFF.
Locate the battery.
Clamp Tester to
Battery [+] and [-]
posts. Check battery
rating [CCA, SAE,
JIS, DIN, IEC, EN,
CA].Key the rating
values. The Tester
posts. Check battery
rating [CCA, SAE,
JIS, DIN, IEC, EN,
CA].Key the rating
values. The Tester
will lead you
through the whole
testing process.
[Exit] to menu.