ATAS 2 Field-Lok FLR154, FLR195 - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODuCT NAmE
2” FIELD-LOk PANEL
FLR154, FLR195
2. mANuFACTuRER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558 -7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODuCT DESCRIPTION
Basic Uses:
2” Field-Lok is a mechanically seamed, double-
locked structural panel that can meet severe
loading requirements. This panel can also be
seamed with a single fold, which meets the
needs for a structural panel and provides a
weather tight roof.
Composition & Materials:
Standard Offerings: 2”Field-Lok panels are
roll-formed from .032 Aluminum; 24 gauge
Metallic Coated Steel.
Special Offerings: 22 gauge Metallic Coated
Steel; 24 gauge 55% Al-Zn Coated Steel with
acrylic coating; 16 oz and 20 oz copper.
Sizes:
The FLR panels have 2” seam heights and are
available in 15 1/4” (FLR154) or 19 1/2” (FLR195)
widths. Panel lengths are cut to customer
specifications with a 4’ minimum and a
maximum to transportation limitations. Clip
ribs are standard and Plank style stiffening ribs
are available. Optional factory applied sealant.
Colors & Finishes:
A choice of 30 colors is available in a KYNAR
500® PVDF or HYLAR 5000® PVDF finish.
(Request color chart or chips).
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF based
finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005,
ASTM D 1400, ASTM D 4138
or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance:
ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894
and ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet:
ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide:
ASTM D 1308 Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Uplift/Load: ASTM E 1592
Uplift: UL 580
Uplift: TAS 125
Uplift: UL 1897
Air Infiltration: ASTM E 283
Water Penetration: ASTM E 331
Wind Driven Rain: TAS 100
Leakage: PA 114
Impact: PA 201
Galvanized Steel: ASTM A 653
55% Al-Zn Coated Steel: ASTM A 792
Aluminum: ASTM B 209
Copper: ASTM B 370
Coil Coating: ASTM A 755
Field Tested and Approved.
Load Tables available upon request.
5. INSTALLATION
Field seaming equipment is necessary to
complete installation of this panel. The
seaming tool may be rented from ATAS at a
weekly or monthly rate. An expansion clip is
used to allow for thermal movement. Optional
factory sealant is also available. Installation
manuals or hands-on training via seminars are
available through ATAS. Visit www.atas.com for
more information.
6. AVAILABILITY & COST
Availability
2” Field-Lok panels are readily available
through ATAS product distributors. A
complete line of related components and
trim accessories is available to complete
the roof system. Flat sheet and/or coil stock
in matching color are also available for
fabrication of related accessories by the
installing contractor.
Cost
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.
8. mAINTENANCE
2” Field-Lok panels are virtually maintenance
free. Surface residue may be easily removed
by conventional cleaning methods. Minor
scratches may be touched up with a matching
paint, available from the manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available from ATAS International, Inc.
ATAS will assist with design ideas and shop
drawings.
10. FILING SYSTEm
• www.construction.com
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Field-Lok TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT715
2"
2"
FLR 195
FLR 154
15 ¼"
19 ½"
P lank R ibs - O ptional
P lank R ibs - O ptional