ATAS Rumba Shake HBS090 - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODUCT NAME
RUMBA SHAKE TM
HBS090
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
With Rumba Shake, a Bermuda system,
the traditional vertical standing seams are
replaced by horizontal “stepped” reveals
spaced every 9”.
Composition & Materials:
Standard Offerings: Rumba Shake panels are
brake formed from .032 Aluminum; 24 gauge
Metallic Coated Steel.
Special Offerings: .040 Aluminum; 22 gauge
Metallic Coated Steel; 22 and 24 gauge 55%
Al-Zn alloy coated Steel with acrylic coating;
and 16 oz. Copper.
Sizes:
Rumba Shake panels are available with a 1”
height and in a 9 ¾” width, with a coverage
of 9” by panel length. Panel lengths are made
to customer specifications, with a standard
length of 12’, and 2’ minimum to 20’ maximum
lengths available.
Colors & Finishes:
A choice of 30 stock colors is available in a
KYNAR 500® PVDF or HYLAR 5000® PVDF finish.
(Request color chart or chips). An anodized
finish is available in Clear or Dark Bronze.
Texture is smooth.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF based
finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich): ASTM G 87
or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and ASTM D
5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308 Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Uplift/Load: ASTM E 1592
Air Infiltration: ASTM E 283
Water Penetration: ASTM E 331
UL Fire resistance rating design numbers: See
www.ul.com, file R12113, or contact ATAS for
current listing.
Impact Resistance: UL 2218
Galvanized Steel: ASTM A 653
55% Al-Zn alloy coated Steel: ASTM A 792
Aluminum: ASTM B 209
Copper: ASTM B 370
Coil Coating: ASTM A 755
Load Table available upon request.
Field Tested and Approved.
5. INSTALLATION
This panel is installed with flat clips, 12” to 24”
on center. Recommended minimum slope
is 4:12. Optional factory sealant is available.
Installation manuals and hands-on training
via seminars are available through ATAS. Visit
www.atas.com for more information.
6. AVAILABILITY & COST
Availability:
Rumba Shake panels are readily available
through ATAS product distributors. A
complete line of related components and
trim accessories is available to complete
the roof system. Flat sheet and/or coil stock
in matching color are also available for
fabrication of related accessories by the
installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry a
limited warranty against chalking and fading.
8. MAINTENANCE
Rumba Shake panels are virtually maintenance
free. Surface residue may be easily removed by
conventional cleaning methods. For painted
products, minor scratches should be touched
up with a matching paint, available from the
manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Rumba Shake TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© ATAS International, Inc. LRD0213 LAT722
9 ¾”
1”
9”
Optional Sealant