ATAS 1 Field-Lok FLL135, FLL175, FLL217 - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODuCT NAmE
1” FIELD-LOk Tm PANEL
FLL135, FLL175, FLL217
2. mANuFACTuRER
ATAS INTERNATIONAL, INC.
website: www.atas.com
email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODuCT DESCRIPTION
Basic Uses:
1” Field-Lok is a mechanically seamed, double-
locked non-structural panel ideally suited for
both straight and curved applications. This 1”
deep panel offers an economical alternative
to snap-on seams, while also maintaining the
flexibility of being curved.
Composition & Materials:
Standard Offerings: 1” Field-Lok panels are
roll-formed from .032 Aluminum; 24 gauge
Metallic Coated Steel.
Special Offerings: 22 gauge Metallic Coated
Steel; 24 gauge 55% Al-Zn coated Steel with
acrylic coating; 16 or 20 oz. Copper.
Sizes:
The FLL panels have a 1” seam height and are
available in 13 1/2” (FLL135), 17 1/2” (FLL175), and
21 3/4” (FLL217) widths. Panel lengths are cut
to customer specifications with a 4’ minimum
and a maximum to transportation limitations.
Curved and tapered panels are available.
Contact ATAS for specifics.
Colors & Finishes:
A choice of 30 colors is available in aKYNAR
500® PVDF or HYLAR 5000® PVDF finish.
(Request color chart or chips).
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF
finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich): ASTM G 87
or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and
ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 23, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308 Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Uplift: UL 580 Class 90; UL 1897
Impact Resistance: UL 2218
Air Infiltration: ASTM E 283
Water Penetration: ASTM E 331
Galvanized Steel: ASTM A 653
55% Al-Zn coated Steel: ASTM A 792
Aluminum: ASTM B 209
Copper: ASTM B 370
Coil Coating: ASTM A 755
Field Tested and Approved.
5. INSTALLATION
Field seaming equipment is necessary to
install this panel. The seaming tool may
be rented from ATAS at a weekly rate. An
expansion clip is used to allow for thermal
movement. Optional factory sealant is
available. Installation manuals or hands-on
training via seminars are available through
ATAS. Visit www.atas.com for more information
6. AVAILABILITY & COST
Availability:
1” Field-Lok panels are readily available
through ATAS product distributors.
A complete line of related components and
trim accessories is available to complete
the roof system. Flat sheet and/or coil stock
in matching color are also available for
fabrication of related accessories by the
installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.
8. mAINTENANCE
1” Field-Lok panels are virtually maintenance
free. Surface residue may be easily removed
by conventional cleaning methods. Minor
scratches may be touched up with a matching
paint, available from the manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEm
• www.construction.com
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Field-Lok TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT713
13 1/2”, 17 1/2”, 21 3/4”
1”
Plank Ribs - Optional