ATAS SterraCore - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODuCT NAmE
SterraCore
2. mANuFACTuRER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODuCT DESCRIPTION
Basic Uses:
SterraCore aluminum composite material
panels provide durable, eye-catching facias,
soffits, canopies, and decorative towers for
retail, schools, hospitals and high profile
commerical projects.
Composition & Materials:
Standard Offerings: polyallomer, corrugated
core between two finished aluminum sheets
Colors & Finishes:
A choice of 30 stock colors is available in
a KYNAR ® 500 PVDF or HYLAR ® 5000 PVDF
finish. (Request color chart or chips). Texture is
smooth.
4. TECHNICAL DATA
KYNAR ® 500 PVDF or HYLAR ® 5000 PVDF based
finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and ASTM
D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet:
ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide:
ASTM D 1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of
AAMA 2605 when applied to aluminum.
Panel testing/ratings:
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved.
5. INSTALLATION
Panels are be installed over a solid substrate
covered with an appropriate water and air
barrier system. Installation methods include
clip and seal, rout and return, and 2-pieces,
snap-module trim.
6. AVAILABILITY & COST
Availability:
SterraCore panels are available through
ATAS product distributors. A complete line of
related components and trim accessories is
available to complete the system. In addition,
a complete line of rainware and perimeter
roof edge trims can be supplied by ATAS to
complement the application. Flat sheet and/
or coil stock is available in matching colors
for fabrication of related components by the
installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
The fluoropolymer, KYNAR 500 ® PVDF or
HYLAR 5000 ® PVDF finish carries a limited
warranty against chalking and fading.
8. mAINTENANCE
SterraCore panels are virtually maintenance
free. Surface residue may be easily removed by
conventional cleaning methods. For painted
products, minor scratches should be touched
up with a matching paint, available from the
manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEm
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© 2013 ATAS International, Inc. LRD1013