ATAS Span Wall BWS240 - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1.PRODUCT NAME
BELVEDERE PANEL ™
SPAN WALL ™
BWS240
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
Span Wall is a structural wall panel that offers
design freedom for all types of buildings.
The panel can be installed either on solid
substrate or spaced framing.
Composition & Materials:
Standard Offerings: Span Wall is roll-formed
from .032 (embossed only), .040 and .050
Aluminum; 24 gauge Metallic Coated Steel
(embossed only).
Special Offerings: 20 and 22 gauge Metallic
Coated Steel; 20, 22 and 24 gauge 55% Al-Zn
alloy Coated Steel with acrylic coating may be
specified, subject to minimum quantities and
lead time.
Sizes and Profiles:
Span Wall has a 4” high rib and is 24”
wide. Panel lengths are cut to customer
specifications, with a minimum of 9’-0”
maximum to transportation limitations and/or
product and project design considerations.
Colors & Finishes:
A choice of 30 stock colors is available in a
KYNAR 500® PVDF or HYLAR 5000® PVDF
finish. (Request color chart or chips). An
anodized finish is available in Clear or Dark
Bronze. Texture may be smooth or embossed,
depending on gauge. Panels can be solid or
perforated.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF
based finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and
ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
UL Fire resistance rating design numbers: See
www.ul.com, File R12113, or contact ATAS for
current listing.
Galvanized Steel: ASTM A 653
55% Al-Zn alloy Coated Steel : ASTM A 792
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved
Load Tables available upon request.
5. INSTALLATION
Installation is with direct fastening methods.
Installation manuals and hands-on training
via seminars are available through ATAS. Visit
www.atas.com for more information.
6. AVAILABILITY & COST
Availability:
Span Wall panels are available through ATAS
product distributors. A complete line of
related components and trim accessories
is available to complete the wall system. In
addition, a complete line of rainware and
perimeter roof edge trims can be supplied
by ATAS to complement the wall system. Flat
sheet and/or coil stock is available in matching
color for fabrication of related components by
the installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry a
limited warranty against chalking and fading.
8. MAINTENANCE
Span Wall panels are virtually maintenance
free. Surface residue may be easily removed by
conventional cleaning methods. For painted
products, minor scratches should be touched
up with a matching paint, available from the
manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Belvedere TM is a trademark of ATAS International, Inc.
Span Wall TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© ATAS International, Inc. LRD0213 LAT745
24”
4”
12”