Atec JDSU-FST-2310 - Manual (Page 2)

Key features of the FST-2310 include:
Application-driven icons
Test application buttons are labeled with icons that clearly depict the way the test
is performed on the circuit; for example, select the “MON/THRU” icon when
performing circuit-monitoring tests – select the “TERM” icon when performing
circuit-terminating tests. The icons and quick setup buttons enable technicians to
use the module effectively with very little training (figure 1).
Simultaneous results analysis for different signal rates
Identify the source of problems quickly by using the FST-2310’s dual results
window to analyze results from different signal rates simultaneously.
Simultaneous results analysis can also be performed on different signal results (for
example, level and bit errors) allowing for easy results correlation and quick
problem identification.
Autoconfiguration
Support for autoconfiguration is provided for all key applications.
Autoconfiguration is capable of setting different test parameters, such as framing
and pattern, as well as detecting the signal’s multiplexed composition. This
enables users to reduce the time required for test setup. Additionally, the FST-2310
has the ability to save and store up to 10 test set configurations that can be recalled
for future use.
Remote control
Remotely configure tests and analyze results in detail using the remote control
GUI option. This allows technicians to conveniently operate the module from a
remote location using the FST-2310’s graphical user interface (GUI) on a remote
PC. The remote control GUI feature enables technicians to connect to the FST-
2310 through the PCMCIA serial or modem card to perform tests and collect test
results.
2
FST-2310 TESTPAD
figure 1 Application-driven icons and simultaneous results
Application-driven icons
Dual simultaneous results window