Atec Anritsu-S331L - Manual (Page 3)

Site Master™ S331L Specifications
S331L TDS PN: 11410-00616 Rev. B 3
Cable and Antenna Analyzer
(continued)
Return Loss
Measurement Range Resolution 0 to 60 dB
0.01 dB
VSWR
Measurement Range 1 to 65
Resolution 0.01
Cable Loss
Measurement Range 0 to 30 dB
Resolution 0.01 dB
Distance-to-Fault
Vertical Range Return Loss 0 to 60 dB
Vertical Range VSWR 1 to 65
Fault Resolution (meters) (1.5 x 10 8 x vp)/ΔF (vp = propagation velocity, ΔF is F2 – F1 in Hz)
Horizontal Range (meters) 0 to (Data Points – 1) x Fault Resolution, to maximum of 1500 meters (4921 feet)
Measurement Accuracy @ 23 °C ± 3 °C
Corrected Directivity ≥ 38 dB, InstaCal ™ calibration
≥ 42 dB, OSL calibration (OSLN50-1, OSLNF50-1)
Return Loss Measurement Uncertainty
Internal Power Meter
Amplitude Maximum, Minimum, Offset, Relative On/Off, Units, Auto Scale
Average Running Average, Max Hold On/Off, Run/Hold, Average Mode Cont/Single
Limits Limit On/Off, Limit Upper/Lower
Frequency Range 50 MHz to 4 GHz
Display Range –100 dBm to +100 dBm
Measurement Range –33 dBm to +20 dBm
Offset Range Max ± 100 dB, user settable value
VSWR 1.5:1 typical
Maximum Power +27 dBm, ± 45 VDC (damage level)
Connector Type N(m), 50 Ω
Accuracy ± 0.7 dB (0 dBm, 1 GHz CW, @ 23 °C ± 3 °C)
Frequency Response and Linearity Additional ± 0.8 dB (± 0.5 dB typical)
Temperature Effect Additional ± 0.02 dB per 1 °C change (typical)
0.1
1
10
35 30 25 20 15 10 5 0
Magnitude Uncertainty
2 GHz
4 GHz
1
10
100
35 30 25 20 15 10 5 0
Phase Uncertainty
2 GHz
4 GHz
Return Loss (dB)
Magnitude (dB) Phase (degr
ees)
Return Loss (dB)