Am2-a and am2e-a specifications, Am2-p specifications, Adsi option – Atec Ameritec-AM2-DE-DX-A-P-D User Manual
Page 6: Expanded system specifications for adsi option
The AM2-A Analog Call Generator provides line
interfaces for 64 analog lines and 160 total lines with
the AM2E-A Expansion Unit.
System
FSK
Expanded System Specifications for ADSI Option
Provides Analog Display Service Interface
(ADSI)/Caller ID test functionality on AM2 Niagara
Model AM2-A.
Dual Tone Alert Signal Detection
Capacity:
•
64 Analog lines:
Signaling Protocols:
•
Bellcore TR-NWT-000030, or
•
British Telecom (BT) SIN 227 and SIN 242,
Cable Television Association (CTA)
TW/P&E/312
US Signaling Protocols:
Low tone frequency:
2130 Hz ± 0.5%
High tone frequency:
2750 Hz ± 0.5%
Receive signal level:
-14 dBm to -32 dBm per
tone, off hook
Signal reject level:
-45 dBm
Twist:
Up to 6 dB
Unwanted signals:
Less than -7 dBm ASL
near end of speech
Duration:
75 to 85 ms
Speech present:
Yes
Non-US Signaling Protocols:
Low tone frequency:
2130 Hz ± 1.1%
High tone frequency:
2750 Hz ± 1.1%
Receive signal level:
-2 dBV to -40 dBV per
tone, off hook
Signal reject level:
-45 dBm
Twist:
Up to 7 dB
Unwanted signals:
Less than -20 dBm 300 to
3400 Hz
Duration:
88 to 110 ms
Speech present:
No
US Signaling
Mark frequency (logic 1):
1200 Hz ± 1%
Protocols:
Space frequency (logic 0):
2200 Hz ± 1%
Received signal level mark:
-12 dBm to -32 dBm
Received signal level space:
-12 dBm to -36 dBm
Twist:
Up to 10 dB
Unwanted signals:
Less than -25 dBm 200 to
3200 Hz
Transmission rate:
1200 Baud ± 1%
Word format:
1 start bit = 0, 8-bit word
(LSB first), 1 stop bit = 1
Non-US Signaling
Mark frequency (logic 1):
1300 Hz ± 1.5%
Protocols:
Space frequency (logic 0):
2100 Hz ± 1.5%
Received signal level mark:
-8 dBV to -40 dBV
Received signal level space:
-8 dBV to -40 dBV
Twist:
Up to 6 dB
Unwanted signals:
Less than -20 dBm 300 to
3400 Hz
Transmission rate:
1200 Baud ± 1%
Word format:
1 start bit = 0, 8-bit word
(LSB first), 1 stop bit = 1
AM2-A and AM2E-A Specifications:
ADSI Option:
The AM2-P Analog Call Generator provides line
interfaces for 16 to 64 analog lines.
System
Signaling Channel
AM2-P Specifications:
Capacity:
•
32 P-Phone (EBS) originating/terminating lines
Each line emulates up to:
•
1 primary set and 3 add-ons
•
1 extension set and 3 add-ons
Call Volume:
•
7,500 confirmed calls per hour
Line Types:
•
Lines compatible with NIS S106-1
•
DTMF, MF R1 and MF R2 dialing
•
900 ohm impedance
•
Simulated sets are not loop powered
9
10
Capacity:
•
AM2-A 64 analog lines
AM2E-A 96 analog lines
Call Volume:
•
AM2-A typically 16,000 confirmed calls per
hour (DTMF dialing, tone ID confirmation, 64
paired lines)
•
With AM2E-A expansion unit 40,000 confirmed
calls per hour (80 paired lines)
Line Interface
•
Loop Start, 2-wire (optional Ground Start)
Options:
•
Pulse, DTMF, MF R1 & MF R2 dialing
•
900 ohm impedance (optional 600 ohm
impedance)
•
Optional 50Hz, 12Hz and 16kHz Meter Pulse
Detection
Front Panel Indicators:
•
64 LEDs, one per line
•
Line Status Display:
Dark: Idle line
Green: Originate line off hook
Yellow: Terminate line off hook
Red: Line error
Message Format:
• Amplitude Shift Keying (ASK), 16 Bit envelope
Carrier Frequency:
• Transmit :
8,000Hz ±200ppm
Level:
1.3 volts peak-to-peak,
± 0.2 volts
• Receive:
8,000Hz ±200ppm
Level:
1.5 volts peak-to-peak
maximum
0.9 volts peak-to-peak
minimum
Bit Rate:
• 1,000 bits per second ±2% half-duplex