Atec Agilent-16047A - Manual (Page 58)

16194A High Temperature
Component Test Fixture
Terminal Connector: 7 mm
DUT Connection: 2-Terminal
Electrical Length: 50 mm
Dimensions (approx.): 150(W) x 40(H) x 80(D) [mm]
Weight (approx.): 350 g
Additional Error:
SMD:
Leaded device:
f: [GHz]
53
Up to 3 GHz (7 mm) SMD
Description: This test fixture is designed for measuring
both axial/radial leaded devices and SMD within the tem-
perature range from –55 to +200°C (recommended to be
used with 4291A/B’s high temperature test head).
Applicable Instrument: 4287A, 4294A + 42942A, 4395A
with Opt.4395A-010 + 43961A, 4396B with Opt.4396B-010
+ 43961A, E4991A, (4195A + 41951A, 4286A, 4291A,
4396A)*
When used with 16085B: 4263B, 4268A, 4279A, 4284A,
4285A, 4288A, (4192A, 4194A, 4263A, 4278A)*
* denotes the instrument is obsolete.
Frequency: DC to 500 MHz (with open and short com-
pensation)
DC to 2 GHz (with open and short and load
compensation)
Maximum Voltage: ±40 V peak max (AC +DC)
Operating Temperature: -55°C to +200°C
DUT size: See figure below.
Furnished Accessories:
Type of Error Impedance
Proportional Error 20 x f 2 [%]
Open Repeatability 80 + 250 x f [µS]
Short Repeatability 0.2 + 2.5 x f [
Ω
]
Type of Error Impedance
Proportional Error 20 x f 2 [%]
Open Repeatability 80 + 250 x f [µS]
Short Repeatability 0.4 + 12.5 x f [
Ω
]
DUT Dimensions
Description P/N Qty. Option
Wrench 8710-1181 1 Standard
Tweezers 8710-2081 1 Standard
50 Ω SMD Resistor NA 10 Standard
Operation and Service Manual 16194-90010 1 Standard
General Sized
Shorting Device 16191-29001 1 16194A-701
(1 Ч 1 Ч 2.4 (mm))
Shorting Device 16191-29002 1 16194A-701
(1.6 Ч 2.4 Ч 2 (mm))
Shorting Device 16191-29003 1 16194A-701
(2.4
Ч
2.4
Ч
3.2 (mm))
Shorting Device 16191-29004 1 16194A-701
(2.4 Ч 2.4 Ч 4.5 (mm))
EIA/EIAJ Industrial Standard Sized
Shorting Device 16191-29005 1 16194A-010
(1
Ч
0.5
Ч
0.5 (mm))
Shorting Device 16191-29006 1 16194A-010
(1.6
Ч
0.8
Ч
0.8 (mm))
Shorting Device 16191-29007 1 16194A-010
(2.0 Ч 1.2 Ч 0.8 (mm))
Shorting Device 16191-29008 1 16194A-010
(3.2 Ч 1.6 Ч 0.8 (mm))
Case for Shorting Devices 1540-0692 1 16194A-010/701