Atec Astro-Med-Dash-8XE - Manual

1.
TEST & MEASUREMENT PRODUCT GROUP
600 East Greenwich Avenue • West Warwick, RI 02893
Phone: 401-828-4000 • Fax: 401-822-2430
toll-free phone: 877-867-9783
e-mail: [email protected]
Dash 8Xe and AstroDAQ Xe Module Specifications
(Updated December, 2005)
NDV1 Differential, non-isolated input module
Connector
Guarded banana jacks (red/black)
Isolation No
Bandwidth (5V Attenuator) 28 KHz (-3db)
Bandwidth (40V Attenuator) 34 KHz (-3db)
Input Differential, DC coupled
Off Ground Measurements Yes
Zero Suppression Yes, digital.
Measurement Ranges +/- 5 V (5 VFS or 10 VFS w/ zero offset)
+/- 40 V (40 VFS or 80 VFS w/ zero offset)
Max Rated Input +/- 40 V
Max Transient Input +/- 40 V
A/D 14 bit SAR
Anti-Aliasing Filter 4 pole Bessel
Accuracy (25°C) 0.25 % of attenuator (12.5 mV and 100 mV)
Cold Start Drift Less than 0.5% of attenuator
Overshoot Less than 1% of attenuator
Intrinsic Noise (pk-pk) < 0.1 % of attenuator
Min Input Impedance 425 K
CMR at 60 Hz Better than -60 dB
Channels Per Module 1
Frequency Counter No
Module Part Number 32750-000
Specifications subject to change without notice