Atec Biddle-651028 - Manual (Page 4)

BIDDLE IMPULSE GENERATORS
ORDERING INFORMATION
15-kV Portable Impulse Generator ......................... 651017
Dual-Voltage Impulse Generator ............................ 651016
Standard Impulse Generator .................................. 651028
Heavy-Duty Impulse Generator .............................. 653031
Optional Accessories
Cat. No. 651016 and 651028
Folding two-wheel hand truck ................................ 650402
Kit of four casters (651028 only) ............................ 650403
Kit of two 10 in. (254 mm) wheels with leveling
foot and pneumatic tires (651028 only) ............ 650404
UNITED STATES
4271 BRONZE WAY
DALLAS, TX 75237-1017 USA
PHONE: (800) 723-AVO-1 (723-2861)
FAX: (214) 333-3533 EXPORT
AVO INTERNATIONAL
4651 S. WESTMORELAND ROAD
DALLAS, TX 75237-1017 USA
PHONE: (214) 331-7363
FAX: (214) 337-3038 CANADA
110 MILNER AVENUE, UNIT 1
SCARBOROUGH, ON M1S 3R2
CANADA
PHONE: (800) 567-0-AVO (567-0286)
FAX: (416) 298-7214
© 2001 AVO INTERNATIONAL PRINTED IN USA
Cat. No. 653031
Caster-mounted with handle ............................. 653031-04
Vertical control panel ......................................... 653031-08
Adjustable pulse rate timer for
repetitions from 2 to 10 seconds .................. 653031-16
Additional 12
µ
F capacitor with adjustable
timer for obtaining 25 kV output with
24
µ
F of capacitance ....................................... 653031-32
Digital voltmeter and ammeter ......................... 653031-48
Item Cat. No. Item Cat. No.
If an integrated fault locating system is required which will provide the pre-location capabilities of arc
reflection or surge pulse reflection methods, consider one of the BIDDLE
® Power Cable Fault Locating
Systems. Any of the PFL series can be supplied complete with a DART ® Cable Analysis System integrating a
total fault locating system into one package.
ADDITIONAL EQUIPMENT FOR CABLE FAULT LOCATING
Acoustic/Electromagnetic Surge Detector
The Biddle ® SD-3000 has been designed to pinpoint faults
in shielded, direct buried cables by detecting both the
electromagnetic and acoustic pulses emitted from an arc-
ing fault when it is surged. Either single or dual detector
configurations are available. As a single detector, the set
provides detection of acoustic
emission, measurement of time
delay between acoustic and
electromagnetic signals, and
distance to the fault. If a sec-
ond detector is added, the set
will also display the direction
to the fault.
The SD-3000 can be used with
Biddle
® PFL Systems or with
surge generators of other
manufacturers.
Electromagnetic Impulse Detector
The Biddle ® Electromagnetic Impulse Detector has been
designed to localize faults on buried cable by detecting
the magnitude and polarity of current established on a
cable during surging with a surge generator.
The instrument is composed of an amplifier module,
sheath coil, and carrying case. It is typically used on
network systems to isolate a fault between manholes. An
optional earth frame and surface coil are available.
The Electromagnetic Impulse Detector can be used with
Biddle PFL Systems or with surge generators of other
manufacturers.