Atec AEMC-6505 - Manual

Features
• True Megohmmeter ®
• Simple operation
• Test voltage combination of 500V, 1000V,
2500V and 5000V
• Insulation measurements from 30kΩ
to 10TΩ (10,000GΩ)
• Adjustable and programmable test voltage
(40 to 5100V)
• Automatic calculation of DAR and PI values
• Direct measurement and display of
Capacitance and Leakage Current
• Display resistance, test voltage and run time
• Programmable test run times and PI
ratio times
• Automatic test inhibition (if live sample >25)
• Automatic discharge and display of
discharge voltage
• Large dual-display with time, voltage and
measurements shown
• Rugged, dual wall, weatherproof field case
• Designed and built to IEC safety standards
MEGOHMMETERS
5000V Megohmmeter
Model 6505
Includes Megohmmeter, field kits, small classic tool bag, three
color-coded leads, three alligator clips, 0.35m guarded jumper cable,
batteries and user manual.
CATALOG NO. DESCRIPTION
2130.18
Megohmmeter Model 6505 (Digital, with Analog Bargraph, Backlight, 500V, 1000V,
2500V, 5000V, Auto DAR/PI)
Accessories (Optional)
2119.76
Leads 5kV rated- Set of 3 color-coded 10 ft 5kV safety leads (red, blue, black)
and set of 3 alligator clips
2119.85
Leads 5kV rated, set of three, 10 ft color-coded with color-coded clips; one red,
one blue and one black with integral 5kV hippo clips (rated 5000V)
2119.86
Leads 5kV rated, set of three, 25 ft color-coded with color-coded clips; one red,
one blue and one black with integral 5kV hippo clips (rated 5000V)
2119.87
Leads 5kV rated, set of three, 45 ft color-coded with color-coded clips; one red,
one blue and one black with integral 5kV hippo clips (rated 5000V)
SPECIFICATIONS
MODEL 6505
InsulatIon tests
Test Voltage/Range
500V
1000V
2500V
5000V
30k Ω to 2000G Ω (2TΩ)
100k Ω to 4000G Ω (4TΩ)
100k Ω to 10,000G Ω (10TΩ)
300k Ω to 10,000G Ω (10TΩ)
User Programmable Test 40 to 1000V: 10V increments
1000 to 5100V: 100V increments
Short Circuit Current <1.6mA ± 5%
Accuracy
10kΩ to 40GΩ
40GΩ to 10TΩ
±5% of Reading ± 3cts
±15% of Reading ± 10cts
DAR (1 min/30 sec) 0.02 to 50.00
PI (10 min/1 min & user programmable) 0.02 to 50.00
Capacitance Measurement 0.005 to 49.99µF; Max resolution 1nF
Leakage Current Measurement 0.00nA to 3mA; Max resolution 1pA
Programmable Run Time R(t) 1 to 60 minutes
Discharge After Test Yes, automatic
Discharge Voltage Display Yes
Voltage Test/Safety Check 0 to 1000V ac / dc (16 to 420Hz); 1V Resolution
Voltage Warning Indicator Yes >25V
Test Inhibition* Yes >25V
Guard Terminal Yes – adjustable from 25 to 1000V depending
on test voltage range in use
ELECTRICAL
Power Source Eight NiMH rechargeable batteries (included);
Line power: 85 to 256V ac (50/60Hz)
*Inhibit voltage is selectable at 3, 10 or 20% of test voltage
1000V
CAT III
R ATIN G
SAFETY