Atec AH-Systems-SAS-550-1B - Manual (Page 4)

A.H. Systems Model Active Monopole Antennas
INTENDED PURPOSES
This equipment is intended for general laboratory use in a wide variety of industrial and
scientific applications and designed to be used in the process of generating, controlling
and measuring high levels of electromagnetic Radio Frequency (RF) energy. It is the
responsibility of the user to assure that the device is operated in a location which will
control the radiated energy such that it will not cause injury and will not violate
regulatory levels of electromagnetic interference.
RANGE OF ENVIRONMENTAL CONDITIONS
This equipment is designed to be safe under the following environmental conditions:
Indoor use
Altitude: up to 2 km
Temperature: 5 ° C to 40 ° C
Maximum relative humidity: 80% for temperatures up to 31 ° C.
Decreasing linearly to 50% at 40 ° C
Pollution degree 2: Normally non-conductive with occasional
condensation.
While the equipment will not cause hazardous condition over this environmental range,
performance may vary.
 A.H. Systems inc. – January 2007
REV B
4