Atec EM-Test-CWS500N1 - Manual

DATA SHEET > CWS 500N1 > 20120604
CWS 500N1
CONTINUOUS WAVE SIMULATOR, 80W
FOR TESTS ACCORDING TO ...
> EN 300329
> EN 300340
> EN 300342-1
> EN 300386 V1.3.2
> EN 301489-1
> EN 301489-17
> EN 301489-24
> EN 301489-7
> EN 55024
> EN 61000-4-6
> EN 61000-6-1
> EN 61000-6-2
> IEC 60601-1-2
> IEC 61000-4-6
> IEC 61326
> IEC 61850-3
CWS 500N1 - THE SINGLE BOX SOLUTION FOR RF CONDUCTED IMMUNITY TESTING
The CWS 500N1 is the most compact single box test equipment for testing conducted rf immunity as per IEC 61000-4-6 and
related standards with a frequency range of 100kHz to 300MHz. Apart from the 1kHz 80% AM signal the CWS 500N1 also
generates a 2 Hz 80% AM signal to test medical appliances and a 1 Hz PM signal with 50% duty cycle required to test safety
equipment like fire alarms. Equipped with a 1 GHz current monitor the CWS 500N1 can be used up to 1 GHz by means of an
external amplifier.
EM TEST supplies a large range of CDNs, EM clamp and current injection clamps as well as the corresponding calibration
accessories. Full compliant levelling can be run from the front panel of the CWS 500N1 storing the results in 5 memory
spaces available in the CWS 500N1.
HIGHLIGHTS
> Signalgenerator 9kHz to 1GHz
> Amplitude modulation: 1Hz to 3kHz (0% to 95%)
> Pulse modulation: 1Hz - 1kHz (10% to 90%)
> Built-in amplifier, 100kHz to 300MHz
> Built-in current monitor, 9kHz to 1GHz
APPLICATION AREAS
INDUSTRY
MEDICAL
BROADCAST
TELECOM
RESIDENTIAL
RENEWABLE ENERGY
www.emtest.com © EM TEST > PAGE 1/4