Atec EM-Test-CWS500N4 - Manual

DATA SHEET > CWS 500N4 > 20121113
CWS 500N4
SIMULATOR FOR CONDUCTED, COMMON-MODE
DISTURBANCES, AS PER IEC 61000-4-16, IEC 61000-4-19
ANNEX C, 0HZ (DC) TO 165KHZ
FOR TESTS ACCORDING TO ...
> EN 61000-4-16
> IEC 60255-22-7
> IEC 60533
> IEC 61000-4-16
> IEC 61000-4-19, Annex C
> IEC 61326
> IEC 61543
> IEC 61850-3
> prTR 50579
CWS 500N4 - TESTING FOR IMMUNITY TO CONDUCTED, COMMON-MODE DISTURBANCES
The CWS 500N4 is the state-of-the-art solution in a compact single-box design to test for immunity to conducted, common
mode disturbances in the frequency range 0Hz (DC) to 165kHz. Such test requirements are specified in IEC 61000-4-16 and
cover continuous mode testing as well as short term testing with DC, 16 2/3Hz, 50Hz and 60Hz with 4 test levels each plus a
sweep mode from 10Hz to 165kHz.
Additionally, the CWS 500N4 can be used for testing electricity metering equipment as per prTR 50579 and Draft standard
IEC 61000-4-19, Annex C.
HIGHLIGHTS
> Most compact equipment for common-mode
disturbances as per IEC 61000-4-16
> Built-in LF signal generator and LF amplifier
> Sweep mode capability 10Hz to 165kHz
> Built-in rectifier module for DC testing
> Option for Electricity Meter testing acc IEC
61000-4-19 Annex C
APPLICATION AREAS
INDUSTRY
RESIDENTIAL
www.emtest.com © EM TEST > PAGE 1/5