Atec EM-Test-CWS500N2 - Manual

DATA SHEET > CWS 500N2 > 20120604
CWS 500N2
CONTINUOUS WAVE SIMULATOR
FOR TESTS ACCORDING TO ...
> BMW GS 95002 (2001)
> DaimlerChrysler DC-10614
> DaimlerChrysler DC-11224
> DO 160 Section 20
> EN 61000-4-6
> EN 61000-6-1
> EN 61000-6-2
> Fiat 9.90110
> Ford ES-XW7T-1A278-AB
> Ford ES-XW7T-1A278-AC
> GMW 3097 (2001)
> GMW 3097 (2004)
> IEC 60601-1-2
> IEC 61000-4-6
> IEC 61326
> IEC 61850-3
> ISO 11452-4
> ISO 11452-5
> MBN 10284-2
> MIL STD 461 D CS 114
> MIL STD 461 E CS 114
> ...
BULK CURRENT INJECTION (BCI) TESTING
Bulk Current Injection (BCI) is a test procedure to proof the immunity to electrical disturbances by narrowband
electromagnetic energy. The test signal is injected by means of a current injection probe physically being a current
transformer laid around the wiring harness. Immunity tests are performed varying the level and the frequency of the injected
test signal. The BCI test methode is widely known in the automotive industry as well as in the military/aircraft industry to
test single components of a complex system.
The CWS 500N2 is designed to be used also for tests with CDNs and EM clamps for tests according to EN/IEC 61000-4-6 and
related standards.
HIGHLIGHTS
> Most compact equipment
> Supports BCI testing as per various standard
requirements
> Basic frequency range 9kHz up to 400MHz
> Extendable frequency range up to 1GHz
> Built-in 100W class A amplifier up to 400MHz
APPLICATION AREAS
AUTOMOTIVE
TELECOM
AVIONICS
MILITARY
INDUSTRY
MEDICAL
BROADCAST
RESIDENTIAL
www.emtest.com © EM TEST > PAGE 1/4