Atec EM-Test-VDS200N - Manual

KARTA KATALOGOWA > VDS 200N-series > 20120419
VDS 200N SERIES
VOLTAGE DROP SIMULATOR - BATTERY SUPPLY SIMULATION
AND DC VOLTAGE SOURCE
DO BADAŃ ZGODNIE Z ...
> Audi (Reference vehicles)
> BMW - (Airbag ECU)
> BMW 600 13.0 (Part 1)
> BMW 600 13.0 (Part 2)
> BMW GS 95002 (1999)
> BMW GS 95002 (2001)
> BMW GS 95003-2
> BMW GS 95024-2-1 (2010-01)
> Case New Holland ENS0310
> Chrysler CS-11809 (2009)
> Chrylser CS-11979
> Chrysler PF-9326
> Cummins 14269 (982022-026)
> DaimlerChrysler DC-10615
> DaimlerChrysler DC-10842
> DaimlerChrysler PF-10541
> DIN 72300-2
> EN 300329
> EN 300340
> EN 300342-1
> EN 301489-1
> ...
VDS 200N - BATTERY SUPPLY SIMULATOR AND DC VOLTAGE SOURCE
The VDS 200N series is used to simulate the various battery supply waveforms recommended by international standards
and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the VDS
200N series as there is a large variety of requirements. Secondly, the VDS 200N series serve as powerful DC voltage supplies
for the DUT during the tests with automotive transients. The VDS 200N series covers all three supply voltage categories.
Their current capability ranges up to 200A depending on the model and your application.
HIGHLIGHTS
> Voltage up to 60V
> Current up to 200A (peak up to 1,000A)
> Bipolar-amplifier models available
> Low output impedance
> Powerful DC voltage source
> Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
> Pre-programmed test routines to simulate various
supply waveforms
OBSZARY ZASTOSOWAŃ
AUTOMOTIVE
TELECOM
MILITARY
AVIONICS
www.emtest.com © EM TEST > STRONA 1/5