Atec EM-Test-UCS-500N5E - Manual

DATA SHEET > UCS 500N5E > 20130322
UCS 500N5E
EFT/BURST GENERATOR UP TO 5.5KV, IEC/EN 61000-4-4
FOR TESTS ACCORDING TO ...
> EN 300329
> EN 300340
> EN 300342-1
> EN 300386 V1.3.2
> EN 301489-1
> EN 301489-17
> EN 301489-24
> EN 301489-7
> EN 50121
> EN 55024
> EN 61000-4-4
> EN 61000-6-1
> EN 61000-6-2
> IEC 60255-22-5
> IEC 61000-4-4
> IEC 61326
UCS 500N5E - EFT/BURST GENERATOR THAT GOES BEYOND STANDARD REQUIREMENTS
The UCS 500N5E is a new dedicated EFT/Burst generator based on the successful UCS 500N series of ultra-compact
simulators. Offering all the benefits of the well-known UCS 500N5 it is designed as a Burst generator only. This makes it the
full performing Burst tester as per IEC/EN 61000-4-4 with the best benefit-to-cost ratio yet upgradeable to include other test
abilities such as Combination Wave Surge and PowerFail.
Apart from its built-in single phase test capability it is extendable for testing three-phase DUTs by means of automatically
controlled external coupling networks up to 100A. EM TEST supplies a large range of accessories for various applications.
HIGHLIGHTS
> Fully compliant to IEC 61000-4-4 Am1 Ed.2
> Test voltage up to 5.5kV
> Up to 10,000 pulses per second
> Up to 1,000 pulses per burst
> Built-in single phase coupler 300V/16A
> Manual operation from front panel
> USB and GPIB-Bus for remote control
APPLICATION AREAS
INDUSTRY
MEDICAL
RESIDENTIAL
TELECOM
COMPONENTS
BROADCAST
RENEWABLE ENERGY
www.emtest.com © EM TEST > PAGE 1/4