Atec Electro-Metrics-EM-6992 User Manual
Atec Equipment
●
●
EM-6992 PROBE SET, HAND HELD
DESCRIPTION:
The Electro-Metrics EM-6992 Hand Held Probe Set is designed to assist
in pinpointing the specific source of emissions during the diagnostic
testing phase of an EMI compliance investigation.
A selection of probes of varying sensitivities is provided for both E-field
and H-field analysis up to 1000 MHz.
APPLICATIONS:
When used with an EMI or Spectrum Analyzer, the EM-6992 set allows
easy identification of emission sources.
CONFIGURATION:
The probe set contains all of the units shown in the table below and a
custom carrying case, which has space for all probes in the set.
Model #
Description
Response (Field)
Impedance (Nominal)
EM-6993
6 cm Loop
H Field
50
EM-6994
3 cm Loop
H Field
50
EM-6995
1 cm Loop
H Field
50
EM-6996
3.2 cm Ball
E Field
50
EM-6997
Stub
E Field
50
All specifications subject to change without notice. Unless otherwise specified, product is manufactured
in Johnstown, NY USA
Rev: 960313