Atec Agilent-N5227A User Manual
Agilent 2-port and 4-port pna network analyzer, Data sheet and technical specifications
Advertising
Table of contents
Document Outline
- Documentation Warranty
- DFARS/Restricted Rights Notice
- Corrected System Performance
- System Dynamic Range and Receiver Dynamic Range
- Table 1. System Dynamic Range and Receiver Dynamic Range, Option 200, 400
- Table 2. System Dynamic Range at Test Port (dB)
- Table 3. Extended Dynamic Range at Direct Receiver Access Input (dB) - Specification
- N5227A Corrected System Performance, All Options
- Table 4a. N5227A with 85058B Calibration Kit
- Table 4b. N5227A with N4694A 2-Port Electronic Calibration Module
- Uncorrected System Performance
- Test Port Output
- Table 6. Frequency Information, All Options
- Table 7a. Maximum Leveled Power (dBm) - Specification
- Table 7b. Maximum Leveled Power (dBm) - Typical
- Table 8. Power Level Accuracy (dB), All Options
- Table 9a. Power Level Linearity (dB), All Options - Specification
- Table 9b. Power Level Linearity (dB), All Options - Specification
- Table 10a. Power Sweep Range (dB) - Specification
- Table 10b. Power Sweep Range (dB) - Typical
- Table 11. Nominal (Preset) Power (dBm)
- Table 12. Power Resolution and Maximum/Minimum Settable Power, All Models and Options
- Table 13. 2nd and 3rd Harmonics at Max Specified Power (dBc) All Options - Typical
- Table 14. Non-Harmonic Spurs at Nominal Power (dBc), All Options - Typical
- Table 15. Phase Noise (dBc/Hz), All Options - Typical
- Test Port Input
- Table 16. Test Port Noise Floor (dBm) @ 10 Hz IFBW, All Options
- Table 17. Direct Receiver Access Input Noise Floor (dBm)
- Table 18a. 0.1 dB Receiver Compression at Test Port (dBm), Option 201, 219, 401, 419 - Typical
- Table 18b. Receiver Compression at Test Port Power - Specification
- Table 19. N5227A Trace Noise Magnitude (dB rms)
- Table 20. N5227A Trace Noise Phase (deg rms)
- Table 21. Reference Level Magnitude, All Models and Options - Specification
- Table 22. Stability, All Options - Typical
- Table 23. Damage Input Level, All Options
- Dynamic Accuracy
- Table 24. N5227A Dynamic Accuracy
- N5227A Dynamic Accuracy, 10 MHz - Specification
- N5227A Dynamic Accuracy, 50 MHz - Specification
- N5227A Dynamic Accuracy, 500 MHz - Specification
- N5227A Dynamic Accuracy, 1 GHz - Specification
- N5227A Dynamic Accuracy, 2 GHz - Specification
- N5227A Dynamic Accuracy, 20 GHz - Specification
- N5227A Dynamic Accuracy, 26.5 GHz - Specification
- N5227A Dynamic Accuracy, 35 GHz - Specification
- N5227A Dynamic Accuracy, 40 GHz - Specification
- N5227A Dynamic Accuracy, 50 GHz - Specification
- N5227A Dynamic Accuracy, 60 GHz - Specification
- N5227A Dynamic Accuracy, 67 GHz - Specification
- Table 25. Group Delay - Typical
- Table 24. N5227A Dynamic Accuracy
- General Information
- Measurement Throughput Summary
- Specifications: Front-Panel Jumpers
- Table 35. Measurement Receiver Inputs (dBm) - Typical
- Table 36. Port 1 Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
- Table 37. Port 2, 3, 4 Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
- Table 38. Source Outputs (dBm) - Typical
- Table 39. Coupler Inputs (dB) - Typical
- Table 40 Damage Level, All Options - Typical
- Test Set Block Diagrams