Optional capabilities, Vectorstar™ ms4640b series optional capabilities – Atec Anritsu-MS4640B User Manual
Page 31
VectorStar™ MS4640B Series
Optional Capabilities
MS4640B Series TDS
PN: 11410-00611 Rev. A
31
Optional Capabilities
Time Domain Measurements – Option 002
Displays all S-parameters and overlays with Frequency Domain, Low-pass Mode with added harmonics frequency
list flexibility, Band-pass Mode, Phasor Impulse Mode, Windowing, Gating (pass-band or reject-band), and
Frequency with Time Gate.
Receiver Offset – Option 007
Independent Source/Receive Functions
Allows for independent source and receive functions for Mixer, Harmonics, IMD and other measurements, where
the source and receive frequencies are offset.
Multiple Source Control Mode
To independently control the frequencies of up to four external sources, in addition to the internal source, and
the receiver, in a synchronized manner.
NxN Frequency-Translated Devices
Provides calibration and measurements capability for NxN Frequency-translated devices.
For accurate and absolute magnitude and phase measurements of match, gain/loss, and group delay of devices
such as mixers and converters.
Dual Source Architecture — Option 031
Description
Adds a second internal source to the VNA structure and removes the transfer switch. This architecture results in
higher test port power and improved dynamic range. Combined with Option 007 Receiver Offset, allows two
sources and the receiver to be active at the same time and at independent frequencies. When both sources are
active and at the same frequency, a relative phase shift can be set between them. When combined with
Option 043 DifferentialView™, adds the ability to perform true mode stimulus measurements of differential
devices.
Required Options
None
Compatible Options
Option 002 Time Domain
Option 007 Receiver Offset
Option 035 IF Digitizer
Option 042 PulseView™
Option 043 DifferentialView™
Option 051 Direct Access Loops
Options 061/062 Active Measurements Suite
Option 070 70 kHz Low Frequency Extension
Options 084/085 Broadband/Banded/Millimeter-Wave Extension
Incompatible Options
Options 080/081 Broadband/Millimeter-Wave
Options 082/083 Banded Millimeter-Wave Extension