Atec Agilent-6570A Series - Manual

Agilent 6570A Series Single-Output,
2000 W DC Power Supplies
Data Sheet
Speed and accuracy for test optimization
This series of 2000 watt DC power
supplies has the exceptional, proven
reliability that test system engineers
look for. It also has the unusual
combination of high efficiency and
low noise operation.
These DC power supplies can be
controlled either from the front panel
or via an analog programming voltage.
When used in a test system, the fast
up and down programming helps
decrease test time. Quickly reacting
protection features, including CV/CC
mode crossover and over-voltage
protection help protect your valuable
assemblies from damage.
Lab-bench use is enhanced by the
fan-speed control, which minimizes
acoustic noise. The extremely low
ripple and noise helps the test engineer
make extremely accurate current and
voltage measurements.
• Front panel and analog control of output voltage and current
• Fast, low-noise outputs
• Fan-speed control to minimize acoustic noise
• Protection features to ensure DUT safety