Atec AdaptivePowerSystems-1000 Series - Manual

The APS 1000 Series frequency
and voltage converters are
economically priced and offer
top of the line performance.
The series consists of seven 1 phase output instruments
ranging in size from 2 kVA to 40 kVA. The converters allow
the user to duplicate a utility grid of either 50 or 60 hertz
for export product testing or operation of imported
equipment. The frequency can be adjusted to 400 hertz
for applications such as the testing of military/avionics
equipment or for the operation of 400 hertz electronics
that are onboard an aircraft or a military vessel.
The adjustable frequency band of 45 to 500 Hertz in
conjunction with the dual voltage ranges of 0-150 volts
or 0-300 volts provides full capabilities for testing and
operating electronics worldwide.
Setup and operation of the APS 1000 Series is
exceptionally easy. The simple front panel layout allows
users to continuously vary voltage and frequency or
to select preset standard frequency settings. Individual
meter displays provide digital readouts for frequency,
voltage and current while a digital multimeter displays
power or power factor.
The APS 1000 Series converters are a simple and cost
effective solution for all of your AC power conversion needs!
Worldwide
Supplier
of Power
Conversion
Equipment
Toll Free 1-866-517-8400 www.adaptivepower.com
TM
Key Features & Specifications for the APS 1000 Series
• Output Power: 2 kVA to 40 kVA
• Output Frequency: 45-500 Hz
• Output Voltage: Dual range, 0/150 V or 0/300 V,
1 phase
• Isolated Output, THD: < 1%
• Input Requirements: 220, 240, 380, 415, 480 VAC
± 10%, 3 phase, 47-63 Hz (2kVA, 3kVA
and 5kVA, 230VAC ± 15%, 1 phase)
• Intuitive Front Panel Controls: Frequency and Voltage
• Easy to Read LED Displays: Frequency, Voltage, Current,
Power and Power Factor
• Memory Locations: Can save three desired settings
of any voltage, frequency and current limit covered in
the output parameters