Atec ENI-A Series - Manual

The "A' Series of power amplifiers covers the
frequency range of 300kHz to 35MHz with lin-
ear power output ranging from 150 to 1000
Watts and with saturated power output up to
2000 Watts.
Primarily designed for use in HF transmitters,
nuclear accelerators, NMR systems, plasma
equipment and RFI/EMI applications. These
extraordinarily compact and efficient RF
sources will operate reliably under the most
extreme environmental conditions without
damage or failure.
Highly Linear Class A units will amplify AM,
FM, SSB, Pulse and other complex modula-
tions with minimum distortion. Unconditional
stability and absolute protection against over-
drive and overload makes them ideal for appli-
cations involving highly mismatched or
non-linear loads such as gas plasmas. Their
high gain and flat frequency response makes
them compatible with all laboratory signal gen-
erators and synthesizers.
Front panel meters display RF output voltage
as well as power output into 50 Ohms. Integral
regulated power supplies and cooling systems
permit full power operation over a wide range of
temperature and AC line conditions.