Atec Com-Power-pa-010 - Manual

Com-Power PA-010 Preamplifier, 100 Hz - 30 MHz
The Com-Power PA-010 is a general purpose, broadband, high gain, bench top
preamplifier. The PA-010 reduces floor noise and increases system sensitivity to low
level signals during Electromagnetic Interference (EMC) testing. It also provides input
isolation to your expensive test equipment. The PA-010 operates from 100 Hz to 30
MHz.
The simple front panel consists of two 50 Watt matched BNC connectors for input and
output. The preamplifiers were designed to have minimal gain variation for the entire
frequency range to reduce EMC measurement errors.
The PA-010 is individually calibrated and the gain data is shipped with the unit. Power
to the PA-010 is powered by 115 VAC, 60 Hz line input.
Specifications
Frequency Range
100 Hz -
30 MHz
Typical Gain
39 dB
Flatness
± 2