Atec AH-Systems_PAM-2640 - Manual

AH Systems
PAM-2640
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own
power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come
with a 15-volt DC regulated power source. A low voltage indicator confidently allows you to power the amplifier with
your own external 15-volt DC battery. This makes it a convenient choice for field measurements. See table below for
amplifier specifications.
Specifications
Amplifier Type Low Noise Amplifier; Broadband Preamplifier
Applications Mobile / Wireless Systems; EMC/EMI Testing
Primary Performance Specifications
Frequency Range 26000 to 40000 MHz
Minimum Gain 16.00 dB
Maximum Gain 22.00 dB
Gain Flatness 1.40 dB
Input VSWR 1.70 :1
Output VSWR 1.70 :1
Dynamic Range
Noise Figure 4.50 dB
Amplifier Package
Package Type Connectorized
Connectors 2.9mm
Electrical Characteristics
Operating Voltage 15.00 volts
Operating Voltage 15.00 volts
Operating current 0.1800 amps