Atec AH-Systems_PAM-0202 - Manual

PAM-0202
Preamplifier
20 MHz – 2 GHz
With at least 30dB of gain, this preamplifier will
improve overall system sensitivity. Designed to
meet the needs of your various testing
requirements.
Frequency Range: 20 MHz – 2 GHz
Gain (typical): 30.4 dB
Gain (minimum): 29.5 dB
Flatness: +/- 0.7 dB
Noise Figure: 4.0 dB
Output Power @ 1 dB
compression
+ 6 dBm
Input VSWR (typical): Less than 1.5:1
Output VSWR (typical): Less than 1.8:1
Connector: N-Type, female
Physical Dimensions
Height: 2.5 in. (63 mm)
Width: 3.75 in. (95 mm)
Length: 6.25 in. (158 mm)
Weight: 1.1 lb.'s (0.5 kg)
Features
• Wide Bandwidth of 20 MHz to 2 GHz
• Low VSWR, High Gain
• Individually Calibrated
• Rugged Design
The PAM-0202 preamplifier is an excellent choice for improving system dynamic range. The
performance of this preamplifier will increase your system sensitivity by at least 30 dB. When
measuring in the EMC lab or out in the field for general RFI testing, this preamplifier has a rugged
compact design.
Recommended Accessories
• SAS-510-2 (Log Periodic Antenna)
• SAC-213 (3 Meter Cable)
• SAC-213-0.5 (0.5 Meter Cable)