Atec AR-60S1G3 User Manual

Atec Equipment

Advertising
background image



































































160 School House Road, Souderton, PA 18964-9990 USA

Phone 215-723-8181•FAX 215-723-5688



MODEL 60S1G3
M1, M2, M3, M4,
M5
60 WATTS CW
0.8 - 3.0 GHz


The Model 60S1G3 is a solid state, self-contained, air-cooled, broadband amplifier designed for
applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish
contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for
immediate equipment rack mounting.

The 60S1G3, when used with a sweep generator, will provide a minimum of 60 watts of RF power.
Included is a front panel gain control which permits the operator to conveniently set the desired output
level. The 60S1G3 is protected from RF input overdrive by an RF input leveling circuit which controls
the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm.
The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an
over-temperature condition occurs due to cooling blockage or fan failure. There is a digital display on
the front panel to indicate the operate status and fault conditions if an over-temperature or power
supply fault has occurred. The unit can be returned to operate when the condition has been cleared.
The 60S1G3 digital panel provides control of all amplifier functions both locally and remotely via
IEEE-488 (GPIB) or RS-232 interfaces.

The low level of spurious signals and linearity of the Model 60S1G3 make it ideal for use as a driver
amplifier in testing wireless and communication components and subsystems. It can be used as a test
instrument covering multiple frequency bands and is suitable for a variety of communication
technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test
applications where undistorted modulation envelopes are desired.

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

OUTP

UT P

O

W

E

R (W

atts)

0

10

20

30

40

50

60

70

3RD ORDER INTERCEP

T

P

O

INT (dBm)

0.5

1

1.5

2

2.5

3

3.5

FREQUENCY (GHz)

60S1G3

Typical Performance

LINEAR @ 1dB COMPRESSION

3RD ORDER INTERCEPT POINT

LINEAR @ 3dB COMPRESSION

REV051704

Advertising