Atec Amplifier-Research-50WD1000 User Manual
Atec Equipment
032508
160 School House Road Souderton, PA 18964-9990 • 215-723-8181 • www.ar-worldwide.com
Page 1 of 2
Model 50WD1000,
M1 through M3
50 Watts CW
DC–1000MHz
The Model 50WD1000 is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for
applications where extensive bandwidth and high gain are required. Push-pull circuitry is utilized in all of the
high power stages in the interest of lowering distortion and improving stability. The Model 50WD1000 covers
the frequency range from D.C. to 1000MHz in two bands. The low band covers from DC to 0.5MHz. The high
band covers from 0.5MHz to 1000MHz. These bands can be selected automatically, manually or by remote
control through the remote connector. The 50WD1000, when used with an RF sweep generator, will provide a
minimum of 50 watts of swept power. Provisions are included for the remote control of the basic operating
functions of the amplifier. Computer control can be accomplished using our CP2001 or CP3000 accessories.
0
10
20
30
40
50
60
70
WATTS
50WD1000 TYPICAL POWER OUTPUT
LINEAR @ 1dB COMPRESSION
1GHz
D.C.
1kHz
100kHz 1MHz
100MHz
10kHz
10MHz
100Hz
LINEAR @ 3dB COMPRESSION