Atec Agilent-E4401B-02B-04B-05B-07B - Manual (Page 4)

4
RF input VSWR 6 (at tuned frequency, 10 dB attenuation)
E4401B
1 MHz to 1.5 GHz 1.35:1
E4402B
9 kHz to 100 kHz 2:1
100 kHz to 3 GHz 1.4:1
E4404B/05B
9 kHz to 100 kHz 2:1
100 kHz to 6.7 GHz
1.3:1
6.7 GHz to 13.2 GHz 1.5:1
E4407B
9 kHz to 6.7 GHz 1.3:1
6.7 GHz to 13.2 GHz 1.5:1
13.2 GHz to 22 GHz 2:1
22 GHz to 26.5 GHz
2.2:1
Resolution bandwidth switching uncertainty
(at reference level)
1 kHz RBW
Reference
10 Hz to 3 MHz RBW ±0.3 dB
5 MHz RBW ±0.6 dB
Reference level
Range –149.9 dBm to maximum mixer level
+ attenuator setting
Resolution
Log scale ±0.1 dB
Linear scale ±0.12% of reference level
Accuracy (reference level ±0.3 dB (–10 dBm to –60 dBm)
– attenuator setting ±0.5 dB (–60 dBm to –85 dBm)
+ preamp gain) ±0.7 dB (–85 dBm to –90 dBm)
Display scale fidelity
Log maximum cumulative
RBW
≥
1 KHz
dB below reference level Typical
0 dB (Reference) ±0.00 dB ±0.00 dB
>0 to 10 dB ±0.22 dB ±0.08 dB
>10 to 20 dB ±0.24 dB ±0.09 dB
>20 to 30 dB ±0.26 dB ±0.10 dB
>30 to 40 dB ±0.40 dB ±0.23 dB
>40 to 50 dB ±0.57 dB ±0.35 dB
>50 to 60 dB ±0.57 dB ±0.35 dB
>60 to 70 dB ±0.66 dB ±0.39 dB
>70 to 80 dB ±0.66 dB ±0.46 dB
>80 to 85 dB ±1.15 dB ±0.79 dB
RBW
≥
300 Hz, (Option 1DR)(span >0 Hz)
0 dB to –98 dB ±(0.3 dB + 0.01 x dB from
reference level)
≥
98 to 120 dB ±(2.0 dB from reference level) 6
Log incremental accuracy
0 dB to –80 dB ±0.4dB/4dB from reference level
Linear accuracy ±2% of reference level
Linear-to-log switching
Uncertainty ±0.15 dB at reference level
Spurious responses
Second harmonic distortion
E4401B
2 MHz to 750 MHz <–75 dBc for –40 dBm tone at input
mixer
5 . (+35 dBm SHI)
E4402/04/05/07B
10 MHz to 500 MHz <–65 dBc for –30 dBm tone at input
mixer
5 .
500 MHz to 1.5 GHz <–75 dBc for –30 dBm tone at input
mixer
2 . (+45 dBm SHI)
1.5 GHz to 2.0 GHz <–85 dBc for –10 dBm tone at input
mixer
2 .
>2.0 GHz <–100 dBc for –10 dBm tone at input
mixer
5 (or below displayed average
noise level).
Third-order intermodulation distortion
E4401B
10 MHz to 1.5 GHz <–87 dBc for two –30 dBm tones at
input mixer
5 and >50 kHz separation.
(+13.5 dBm TOI, +19 dBm typical)
E4402B/04B/05B/07B
100 MHz to 3.0 GHz <–85 dBc for two –30 dBm tones at
input mixer
5 and >50 kHz separation.
(+12.5 dBm TOI, +16 dBm typical)
>3.0 GHz to 6.7 GHz <–82 dBc for two –30 dBm tones at
input mixer
5 and >50 kHz separation.
(+11 dBm TOI, +18 dBm typical)
>6.7 GHz <–75 dBc for two –30 dBm tones at
input mixer
5 and >50 kHz seperation.
Other input-related spurious
>30 kHz offset <–65 dBc for –20 dBm tone at input
mixer
5 .
Residual responses
(input terminated and 0 dB attenuation)
150 kHz to 6.7 GHz <–90 dBm
Amplitude reference output
E4402B/04B/05B/07B –20 dBm (nominal), 50 MHz
General specifications
Temperature range
Operating 0 °C to + 55 °C
Storage –40 °C to + 75 °C
EMI compatibility Conducted and radiated interference
is in compliance with CISPR Pub.
11/1990 Group 1 Class A
(Option 060) CISPR Pub. 11/1990 Group 1 Class B23
Audible noise
<40 dBa pressure and <4.6 bels
power (ISODP7779)
Military specification Type tested to the environmental
specifications of MIL-PRF-28800F
class 3.
Power requirements
ON (line 1) 90 to 132 V rms, 47 to 440 Hz
195 to 250 V rms, 47 to 66 Hz
Power consumption <300 W
Standby (line 0) Power consumption <5 W
dc operation
Voltage 12 to 20 Vdc
Power consumption <200 W