Atec Acterna-MS1000-1200-1300D-1400 - Manual (Page 4)

Tilt mode
Tilt measurement is a fast and effective
method to balance line extenders and
in-home amplifiers.
Customized channel plans
Channel plans can be built, stored, and
edited. This is convenient if meters are
used for more than one plant. It allows
the user to quickly select the correct
channel plan on which they are
working. It is only necessary to build a
channel plan once. A copying function
makes it possible to transfer channel
plans easily from one field instrument
to the other (MS-1200D, MS-1300D
and MS-1400).
StealthWare™ makes it possible to
upload and download channel plans
from a PC to the meter (MS-1300D,
MS-1400).
4
SIGNAL LEVEL METERS
AutoTest
To certify that the network termination
and home network are within the
specifications,
or for proof-of-
performance compliance data, an
AutoTest can be performed. Tests can
be executed immediately or scheduled
over a period of
time. When
configuring an AutoTest, information
about the location at which the test is
being performed can be recorded. Files
can be created for commonly tested
locations so that information only
needs to be entered once. Users can
print either a test report for each
interval, or a comprehensive 24-hour
report that summarizes data collected
from up to four intervals.
The tilt display provides a display of up to six
channels that updates in less than a second.
(MS-1200D, MS-1300D, MS-1400) AUTO TEST results are time, date and temperature
stamped and can easily be stored, viewed,
printed (MS-1200D, MS-1300D, MS-1400)
or uploaded to StealthWare software
(MS-1300, MS-1400)