Atec ILX-Lightwave-MPS-8033 - Manual

The MPS-8033 series of Fiber Optic Sources are
microprocessor controlled laser diode sources, capable
of providing up to 20 mW of power at user-specified wave-
lengths including WDM C-Band and L-Band wavelengths.
Designed for component testing, power meter calibration,
and general laboratory use, the MPS-8033 utilizes proven
precision laser diode temperature and current control
electronics technology developed by ILX Lightwave.
Plus, each MPS-8033 comes equipped with a stan-
dard GPIB remote interface for easy incorporation into
production automated test system or computer controlled
laboratory test.
Product Features
Precision Fiber Optic Measurement
Industry best temporal stability as
great as ±0.005 dB
Provides up to 20 mW of optical
power with WDM C-Band or
L-Band DFB laser diodes
Provides up to 1 mW of optical
power with 850 nm, 980 nm,
or 1480 nm FP laser diodes
Easily integrated onto production
test benches via GPIB interface
Other wavelengths available
upon request
Specifications
OUTPUT
Wavelength (nm): Dependent on option
Wavelength Accuracy:
Options /03 - /06: ±20 nm
WDM Options: ±0.10 nm
Output Power:* 0 dBm, 10 dBm or 13 dBm
dependent on option
Power Stability(15 min.): 2 ±0.005 dB
Power Stability(24 hr.): 2 ±0.030 dB
Thermal Stability: 3 0.2 dB
Optical Connector: FC/APC type
Fiber Type: SMF
MODULATION
Type: Internal digital
Frequencies: 270 Hz, 1 kHz, 2 kHz 4
160 Hz to 15 kHz 5
Frequency Accuracy: ±0.1 %
Duty Cycle: 50 ±2 %
Edge Jitter 0.01%
GENERAL
Weight: <4.7 kg (10.3 lbs)
Power, V (50–60 Hz): 90–105
105–125
210–230
220–250
Operating Temperature: 0°C–50°C
Storage Temperature: –40°C to 70°C
Warm Up: 1 hour
Size (HxWxD): 88 mm x 212 mm x 269 mm
3.5" x 8.4" x 10.6"
NOTES
* Into a single mode fiber.
1 T = const. After warm-up period of 60 min. with output enabled.
2 T = ±1°C. After warm-up period of 60 min. with output enabled.
3 Over entire operating temperature range (0°C to 50°C).
4 Via front panel.
5 Via GPIB Interface.
Instrument driver for LabVIEW ® 3.0 available at no charge upon
request.
LabVIEW
® is a registered trademark of National Instruments.
In keeping with our commitment to continuing improvement, ILX Light-
wave reserves the right to change specifications without notice and
without liability for such changes.
ORDERING INFORMATION
Precision Fiber Optic Source
MPS-8033/03 1550 nm, DFB with optical isolator
MPS-8033/04 980 nm, Fabry-Perot
MPS-8033/05 1480 nm, Fabry-Perot
MPS-8033/06 850 nm, Fabry-Perot
WDM C-Band and L-Band laser types available.
Call for details
.
www.ilxlightwave.com
Rev. 2/5/04
P.O. Box 6310, Bozeman, MT 59771 • FAX: 406-586-9405
1-800-459-9459
For information call
International Inquiries: 406-586-1244
email: [email protected]
Precision Fiber
Optic Source
MPS
8033
Precision Fiber
Optic Source
MPS
8033