Atec JDSU-C8555 User Manual

Atec Equipment

Advertising
background image

Technical specifications

Display
High visibility touchscreen TFT color display, 10’4 inches,

LCD 800 x 600

Storage

Internal memory

8 Mb

Hard disk

Min 6 GB

Floppy disk drive (optional)

3.5 inches

CD read/write (optional)
Input/output interfaces

RS232C, 2 x USB,VGA, RJ-11

modem (optional), RJ-45 Ethernet,

DIN external switch, compact flash*

* Compact flash receptacle is used for the Transport Module

application card

Optional Interfaces

Power meter (optional)

+ 10 to -50 dBm (-45 dBm from

800 nm to 1250 nm)

Talk set (optional)

45 dB range

VFL (optional)

1 mW, Class 2 laser, universal

push/pull connector video

Video microscope (optional)

250x, 400x, through USB port

Power Supply, Battery

Battery type
Internal standard removable Li-Ion batteries
Operation time

Up to 1.5 hours at 10 Gb/s rates

with one battery (two batteries possible)

Internal charger

Power supply, AC/DC

Transport Module power adapter:

100-240 V, 50-60 Hz, 2A, Output: 24 V, 6.25 A

To be used when operating a MTS-8000

with the Transport Module.

Charging Time

One battery, unit non operating: 3 hours

One battery, unit in operation: up to 9 hours

Trickle charge

Yes

General specifications

Module physical specifications

Height

2.13 inches/5.41 cm

Width

12.16 inches/30.88 cm

Depth

9.96 inches/25.3 cm

Weight

5.5 lbs/2.5 kg

Combined physical specifications

for Transport Module when attached to the base unit a battery
module with one battery installed.
Height

5.8 inches/14.73 cm

Width

12.16 inches/30.89 cm

Depth

9.96 inches/25.3 cm

Weight

14.69 lbs/6.6 kg

Operating Temperature

Operational temperature

0º C to +40º C

Storage temperature

-20º C to +60º C

Humidity

5% to 95% without condensation

Shock/Drop Height

Shock - Per IEC 60068-2-27 & 29:The unit resists the
following test:

- Three shocks per axis along each of the three axes, with

power off

- Impacts of 15 G, 1/2 sine, duration 11 ms, at 10 second

intervals

Bumps - Per IEC 60068-2-27 & 29:The unit resists the
following test:

- 1,000 jolts per axis along each of the three axes, with

power off

- Jolts of 15 G, 1/2 sine, duration 6 ms, at 1 second intervals

Drop - Meets requirements as specified in IEC 721-3-7:

- Total of six (6) impacts dropped from a height of 50 cm

(20”). One (1) impact on each of its’ six sides onto a flat
plywood surface.

EMI/ESD

CE Mark Class A

Ethernet
10 GigE LAN/WAN* PHY

Connector Type

FC, SC, ST, LC, DIN
10 GigE LAN/WAN Phy Rates

10.3 Gbps, 10 Gbps

* For 10 Gbps WAN, SONET/SDH capability can be located in
the SONET/SDH section of this datasheet.

Flow Control

Supported

Modes of Operation

Terminate, Monitor, Loopback

Configurations

Single and Dual Port*
*Dual Port testing for 10 GigE requires two Transport Modules

Layer 2 (Ethernet) Traffic Generation
Constant, Bursty, Ramp, Flood Configurable Source and
Destination Address, Frame Format,Type Field (for DIX),
Frame Length (including Jumbo and Undersized),VLAN Tag,
Pause Frames, Payload, Utilization %
Layer 3 (IP) Traffic Generation
Configurable Source and Destination IP Address,DNS Server Type,
Tx Payload,TOS/DSCP,TTL,Packet Size Length (34 – 1500 bytes),
Ping,Traceroute
Layer 2 (Ethernet) Traffic Filtering
MAC Source and Destination Address, Frame Type/Length,
VLAN Tagged or Untagged Frames
Layer 3 (IP) Traffic Filtering
Source and Destination IP Address,TOS Type (TOS/DSCP)

Bit Error Rate Testing Patterns
Layer 1 (Unframed) Bit Error Testing
Patterns

Pattern Segments

Per 802.3ae-2002, Section 52.9.1

An

0x3C8B44DCAB6804F

Bn

0x34906BB85A38884

Patterns

Per 802.3ae-2002, Section 52.9.1

BnBiBnBi

AnAiAnAi
PRBS31(B)*
*(B) This is the test pattern checker defined in 49.2.12 of
802.3ae-2002

Layer 2 (Framed) Bit Error Testing Patterns

PRBS (2^23-1,2^31-1 and inverted selections)
All 1s
All 0s
User defined (32 bits)

Error Insertion
Code Errors

Single, Burst, Rate

Bit Errors

Single, Rate

FCS Errors

Single, Burst

IP Checksum

Single, Burst

ATP Payload

Single, Burst

Key Results

LED’s

Signal Status
Sync Acquired
Link Active
Frame Detected
VLAN Tagged Frame Detected
Pause Frame Detect
Acterna Frame Detect
IP Packet Detect

Signal

Optical Receive Level (dBm)
Remote Fault Seconds
Local Fault Seconds

L1 Errored Stats

Code Violation Rate, Code Violation Seconds,
Code Violations, Pattern Errors, Pattern Error Rate, Pattern
Error Free Seconds, Pattern Error Free Seconds %, Pattern
Errored Seconds, Bit Error Rate, Bit Errors

L2 Link Stats

Delay, Frame Rate, Frame Size, Service Disruption (micro
seconds),Total Utilization,Tx/Rx Mbps,Tx/Rx Mbps Data

L2 Link Counts

Frame Lengths (Binning), Pause Frames, Rx/Tx Frames,
Tx/Rx Acterna Frames,Tx/Rx Frame Bytes, Span Tree
Frames, Unicast Frames,VLAN Frames,VLAN ID,VLAN
Priority, Broadcast Frames, Multicast Frames

L2 Errored Stats

Code Violation Rate, Code Violation Seconds, Code
Violations, Errored Blocks (PCS), Errored Frames, FCS
Errored Frames, Frame Loss Ratio, Jabbers, Lost Frames,
Oos Frames, Runts, Undersized Frames

TRANSPORT MODULE

Advertising