Atec JDSU-FIT Series - Manual

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
www.jdsu.com/inspect
Essential Tools for
Fiber Handling
FIT-S105-PRO
FIT-S115-PRO
FINISH THE JOB IN LESS THAN HALF THE TIME!
(average time to inspect, clean, and test 1 port)
Keep everything together
– Fiber inspection
– Cleaning
– Power measurement
– Fault detection
Free your hands for other tasks
– Logging data
– Accessing equipment
– Routing cable
Stop fumbling with multiple tools
– These essential tools are now integrated
together in a single system
Drive behavior for best practices
– Test the same way every time
– Proactively inspect
– Inspect both sides
– Use clean test leads
– Document data
Inspecting and Testing Fiber Is Now Easier and Faster Than Ever
As fiber penetrates further into next-generation networks, proactively inspecting and cleaning each
connection point is no longer optional, but critical. Using only an optical power meter when testing fiber is an
outdated and high-risk practice. Today’s fiber technician needs a tool kit that provides a seamless workflow for
inspecting, cleaning, testing and troubleshooting a fiber link. Replacing standalone tools with an integrated
test system dramatically improves throughput and productivity. When that test system is designed to
promote an Inspect Before You Connect workflow, it controls technicians’ behavior and drives them to follow
best practices to produce a better performing fiber network. JDSU combines these essential fiber handling
tools into a fast, portable, and easy-to-use system for any fiber technician.
STEPS
1 INSPECT test lead
2
CLEAN and RE-INSPECT
test lead
3 INSPECT bulkhead port
4
CLEAN and RE-INSPECT
bulkhead port
5 TEST and LOG results
6 MOVE to next port
6
:03
in seconds
5
:15
4
:15
3
:07
2
:05
1
:10
New Process 55 seconds
6
:18
in seconds
5
:15
4
:30
3
:25
2
:20
1
:20
Legacy Process 128 seconds