Atec Fluke-Certifiber - Manual

The CertiFiber ® Pro is the Tier 1 (basic)
fiber certification solution and part of the
Versiv™ Cabling Certification product
family. The Versiv line also includes copper
certification, OTDR and Wi-Fi analysis
modules. Versiv is designed around the
revolutionary ProjX™ management system
and Taptive™ user interface. ProjX helps
ensure jobs are done correctly the first
time, thus reducing rework. With the
intuitive Taptive user interface, instrument
set-up and operation are so simple, even
operators with limited cabling skills can
successfully test and troubleshoot a
system. Analysis of measurement data and
professional test reports are easy with the
familiar LinkWare™ management software.
Get ready to overachieve.
Datasheet: CertiFiber® Pro Optical Loss Test Set
Installing a high performance fiber optic cabling system starts with systems design and ends with
systems acceptance. Certifying cabling to industry performance standards is a core element of
the process. The faster it goes, the more profitable you’ll be. Unfortunately, there are a lot of
things that slow the process down - setting the tester up incorrectly, testing to the wrong limits,
waiting for lead technicians to analyze or troubleshoot failures, misinterpretation of results, and
test reports that customers can't understand.
The CertiFiber Pro Optical Loss Test Set (OLTS) helps cabling professionals accomplish more
than ever. It's all about accurate, error-free certification, making jobs easier to manage and
certifying fiber optic cabling to industry standards, faster. CertiFiber Pro OLTS complies with all
applicable cabling standards, which call out the new Encircled Flux launch condition
requirements for optical sources. It's not just for the expert technicians and Project Managers.
Individuals of various skill levels can improve the set-up, operation, test reporting, and
simultaneously manage diverse projects.
Unique features:
Performance:
Versiv enables users to accomplish more than ever with a cable tester,
accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system
acceptance. It eliminates redundant steps, and ensures that all tests are completed
correctly the first time, and every time
Taptive user interface puts advanced data analysis and easy set-up and operation
at the fingertips of technicians of all skill levels
LinkWare management software provides unmatched analysis of test results and
professional test reports
Three-second Autotest optical loss measurement of two fibers at two wavelengths
with distance measurement and optical loss budget calculation
Provides automatic Pass/Fail analysis to industry standards or custom test limits
Identifies incorrect test procedures resulting in negative loss readings
Onboard (USB) inspection camera documents images of fiber optic end-faces
Interchangeable power meter adapters available for all typical connector types (SC,
ST, LC and FC) to enable the most accurate 1-jumper reference method
Built-in visual fault locator for basic troubleshooting and polarity determination
Dual wavelength measurement capability on a single fiber allows the tester to be
used in applications that require only one fiber link
Compliant with TIA-526-14-B and IEC 61280-4-1 Encircled Flux requirements with
no additional equipment or procedures
1 of 8