Atec Fluke-OmniScanner2 - Manual

Advanced certification for
premium network testing
New cables. New standards. New chal-
lenges. That’s the world of network
testing today. As for tomorrow, the only
certainty is even more rapid growth.
Fluke Networks helps you keep the
pace in this ever-evolving industry with
innovative Network SuperVision
Solutions™ for certifying high-perform-
ance cabling systems. The OMNIScanner2
provides advanced certification for
Cat 5/5e/6 cabling links to 300 MHz
using an extendable digital platform
that ensures unprecedented Level III
accuracy. With fast Autotest times,
powerful diagnostics, intuitive graphical
interface and customizable solutions to
support a wide range of testing needs,
look no further than the OMNIScanner2.
Features
• Guaranteed Cat 6 compliance with the
latest TIA/ISO/IEC standards
• Certifies Category 5, 5E and 6 cabling up
to 300 MHz
• Includes Universal Permanent Link
Adapter (OMNI-LIA101S) with set of Cat
6 Personality Modules
• Instantly pinpoints specific connection
failures with S-Bands™ diagnostics
• Features a dynamic range of 100 dB to
accurately measure the faintest signals
• Has manufacturer-specific cable libraries
pre-installed
• Has MultiMediaCard flash storage for
10,000+ Autotests
• Supports lightning-fast download times
through a USB port
• Tests GG45 and TERA cabling systems
Speed your testing cycle
From beginning to end of the network test-
ing process, OMNIScanner2 accelerates your
work, simplifies your tasks and delivers
higher productivity to your bottom line.
Easy set-up
The vendor-specific cable libraries in
OMNIScanner2 make setting up and execut-
ing your test operations easy. Regardless of
the type of cable you are certifying,
OMNIScanner2 speeds through the required
test with ease.
Easy on-site use
Simple, intuitive controls and commands
make training your technicians easy. They
will appreciate the clear display, the tough
protective casing and the new long-lasting
NiMH batteries. MultiMediaCard flash
storage, storing more than 10,000 tests,
will keep your team working without
interruptions.
Pinpoint accuracy
You, your customer and your cable manufac-
turer will all be reassured by the laboratory-
standard accuracy of the OMNIScanner2 –
five times more precise than the proposed
Level 3 standards. Fluke Networks’ patent-
pending S-Bands™ diagnostics can save
hours of confusion about network problems
by instantly identifying (or eliminating) spe-
cific connection failures.
Faster uploads
OMNIScanner2 is enabled for high-speed USB
connection to your computer. With our free
software, you will be able to transfer test
results at breakneck speed to your PC.
Color graphic reports
The PASS report is the end-product your cus-
tomer or management is looking for. This
professional color graphic report that tells
the whole test story at a glance. You can
even insert your logo so that your good
workmanship carries your own name.
Fiber is a snap
The OMNIScanner2 is more than the indus-
try’s leading copper cable tester – it’s the
premier fiber tester, too. Just snap on one
of the handy adapters (sold separately) and
you’re holding the powerful OMNIFiber. The
one-button Autotest for the OMNIFiber MM
and SM units measures length, loss and
propagation delay. They provide simultane-
ous measurements on both transmit and
receive fibers. With the OMNIFiber, you can
conduct bi-directional measurement without
exchanging units, saving time out in the
field.
The OMNIScanner2’s ability to test fiber,
copper and coaxial networks means higher
productivity, lower cost and greater
profitability.
OMNIScanner ® 2
Technical Data
Get Network SuperVision into high-performance
copper and fiber cabling systems.