Atec JDSU-NGC-4500 - Manual (Page 4)

Specifications
Certifier40G: Next-GeNeratioN Cable Certifier
Product specifications and descriptions in this document subject to change without notice. © 2013 JDS Uniphase Corporation 30168306 003 0113 CERTIFIER40G.DS.NET.TM.AE January 2013
Test Parameters
Frequency range 1 to 2000 MHz
TIA-1152 Level IIIe and ISO/IEC 61935-1 Level-IV accuracy
Ordering Information
Part number Description
NGC-4500-FA-xx Copper kit
NGC-4500-MM-xx Copper and multimode fiber kit
NGC-4500-MMSM-xx Class multimode fiber and single-mode
fiber kit
NGC-4500-6ACH2 CAT6A channel adapter pair
NGC-4500-6ALKIT2 CAT6A permanent-link testing kit
NGC-4500-6ALCORD2 CAT6A permanent-link test-cord pair
NGC-4500-MM2
Multimode adapter pair
NGC-4500-SM2 Single-mode adapter pair
NGC-4500-FACHKIT Class FA TERA channel test kit: two
TERA channel adapters plus one TERA-
TERA cable for “set reference”
NGC-4500-FALKIT Class FA TERA permanent-link test kit:
two TERA PL adapters and two TERA-
TERA PL test cords
NGC-4500-FALCORD2 Pair of class FA TERA replacement PL
test cords
NGC-4500-BIX1 Single Belden BIX PL adapter
NGC-4500-GGFACHKIT Class FA GG45/AR45 channel test kit:
two GG45/AR45 channel adapters
plus one GG45-GG45 cable for “set
reference”
NGC-4500-PCORD2 CAT6A patch-cord adapter pair
NGC-4500-6PCORD2 CAT6 patch-cord adapter pair
NGC-4500-5PCORD2 CAT5E patch-cord adapter pair
NGC-4500-PCJACK2 CAT6A patch-cord replacement jack pair
NGC-4500-6PCJACK2 CAT6 patch-cord replacement jack pair
NGC-4500-5PCJACK2 CAT5E patch-cord replacement jack pair
NGC-4500-BAT1
Battery pack
NGC-4500-HCASE Hard carrying case
Copper Cable Tests
Attenuation (insertion loss)
Near-end crosstalk (NEXT) in pair-to-pair and power-sum
Attenuation-to-crosstalk ratio far end (ACRF), pair-to-pair,
and power-sum
Return loss
Loop resistance
Wiremap and shield
Cable length
Total propagation delay
Delay skew between pairs
Fiber Cable Tests
Loss (in each direction)
Fiber cable length
Polarity
Environmental
Operating temperature 0 to 40°C
Storage temperature −20 to 60°C
Relative humidity 10 to 80%
Connectivity
Probe interface connector
RJ45 Ethernet port
USB host and device interfaces
Talk set interface: 3.5 mm stereo jack
Test Standards
TIA -568-C.2 and TIA-1152 CAT-5, 5e, 6, 6A
ISO/IEC 11801, EN 50173 Class-C, D, E, EA, F, FA
TIA-568-C.3 Tier I Fiber certification
ISO/IEC 11801 Tier I Fiber certification
Power Supply
Removable/rechargeable lithium ion batteries provide up to
8 hours continuous operation
AC power adapter
100−240 V AC
Memory
More than 500 MB (more than 2000 test results) of internal
flash memory
1 GB USB flash drive included for flexible test record storage
Dimensions
Mainframe size 232 x 126 x 86.7 mm
(9.13 x 4.9 x 3.41 in)
Mainframe height approx. (per unit) 1.4 kg (3.0 lb)
Module size 84 x 70 x 27 mm
(3.3 x 2.8 x 1.1 in)
Pass/Fail Test Times
TIA CAT-6/CAT-6A test times 9 s
ISO Class -F/FA test times 15 s
TIA/ISO Tier I Fiber test time 8 s
Upgradable to add end-face inspection
* xx suffix indicates power-cord type for different
regions: NA, UK, EU, AU. Please specify regional cables:
North America (NA) Type A, European (EU) Type C,
United Kingdom (UK) Type G, Australian (AU) Type I.
Two complete units minimize time
initiating, naming, and saving results
USB flash drive sup-
ports transferring
test results
For more fiber testing and certification
capabilities, combine the Certifier40G
with one of the market-leading JDSU fiber
testers, such as the T-BERD®/MTS-2000.
Visit www.jdsu.com/go/Certifier40G for more information, vendor endorsements, and product videos.
Test & Measurement Regional Sales
NORTH AMERICA
TOLL FREE: 1 855 ASK-JDSU
(1 855 275-5378)
LATIN AMERICA
TEL: +1 954 688 5660
FAX: +1 954 345 4668
ASIA PACIFIC
TEL: +852 2892 0990
FAX: +852 2892 0770
EMEA
TEL: +49 7121 86 2222
FAX: +49 7121 86 1222
WEBSITE: www.jdsu.com/test