Atec Fujikura_FSM-100 Series - Manual (Page 2)

1 mm 3 mm 1 mm
φ 60 µm φ 125 µm φ 500 µm
offset
The FSM-100 series has the revolutionary design clamp system.
- No need to change V-groove or clamp part
- Programmable for any fiber or coating size
- Reliably captures fiber for good alignment
The FSM-100 series has two electrode positioning techniques in order to provide unprecedented versatility for each specialty fiber.
Patented “Split V-groove” clamping system
Fujikura’s new specialty splicers FSM-100M and FSM-100P offer a host of innovative technology to address the rapidly expanding splicing needs for factory,
manufacturing, laboratory and R&D applications. These models are introduced as “
” splicers due to their unique capabilities to control the plasma
zone of the fusion arc. These capabilities will revolutionize the way users will splice various types of specialty fibers; LDF, low contrast PM, holey structured, etc.
Specialty Fiber Fusion Splicer Polarization Maintaining Fiber Fusion Splicer
“Plasma Zone” fiber positioning
Electrode gap: 1 mm
Electrode gap: 3 mm
Electrode Electrode
3 mm
1 mm
1 mm
3 mm
Electrode Gap
± 0 µm
Electrode Electrode
− 300 µm
＋ 100 µm
V Height Shift
Optimum plasma Zone
a ）
b ）
c ）
Clamp
Split v-groove A
φ 500 µm
φ 60 µm
Split v-groove B
Applicable fiber:
・ Glass clamp: cladding dia. φ 60 to 500 µm
・ Coating clamp: coating dia. φ 100 to φ 2000 µm
FSM-100M FSM-100M FSM-100P FSM-100P