Atec Quadtech-7000 Series - Manual

Series
7000 Precision LCR Meters
USES:
• Production Testing of LCR
Components
• Frequency Response Characterization
of Components
• Component Screening
• Material Testing
• Quality Assurance Testing
• Measuring Dielectric Constant Using
Standard Test Cell
FEATURES:
• Frequency Range 10 Hz to 2 MHz
(7600), 500 kHz (7400)
• 0.05% Basic Measurement Accuracy
• 7 Digit Measurement Resolution
• Programmable Test Voltage and
Current
• Auto Ranging
• Test Setup and Measurement Data
Storage
• Four-Terminal Kelvin Connections
• IEEE-488, RS-232, Handler, and
Parallel Printer Interfaces
• Graphical and Tabular Display of
Swept Frequency, Voltage and Current
Measurements
• Sequence Testing of Up To 6
Individual Tests
• Load Correction
• Binning (15)
• Built-in Automatic Calibration Routine
Introduction
The 7000 LCR Meter is designed to perform precision impedance measurements over a
wide frequency range, 10 Hz to 500 kHz for the model 7400 and 10 Hz to 2 MHz for the
7600. The instrument is capable of measuring 14 different parameters with 0.05% accu-
racy to meet today’s requirements for component and material testing. The ease of use
and user friendly menu programming makes the 7000 Series ideal for applications in
product development, incoming inspections, or production line testing.
Description
14 Different Impedance Parameters Measure and display any two parame-
ters simultaneously to achieve coverage and flexibility not previously available.
Automatic Test Sequencing Run up to six different tests in sequence with a sin-
gle push of the start button. Each test can have different conditions and limits.
Swept Measurements Fast and accurate swept parameter measurements, graphi-
cal or tabular, for verification of component and material response to changes in AC test
frequency, AC test voltage or AC test current, without the need for complex programming
or an external controller.
Program and Data Storage Test setups can be stored and recalled from either
internal memory or from standard DOS formatted 3 1/2” floppy disks. The front panel
can be locked out, with password protection, to ensure procedures are run the same way
every time. Measured data can be stored on a floppy disk and then transferred to PC for
data reduction and analysis.
Load Correction Substantially improves instrument accuracy by performing meas-
urements on a known standard and applying correction to subsequent measurements.
Ideal for repetitive testing of identical devices at like test conditions.
Automatic Calibration Procedure The 7000 can be calibrated without return-
ing the unit to the factory using the NIST traceable QuadTech Calibration Kit, reducing
downtime and calibration costs.
Easy to Use Large LCD graphics display and user friendly menu driven interface allows
the 7000 to be put on line fast, providing useful measurements by operators with little or
no training.
1-800-253-1230
Fax 1-508-485-0295
Intl. 1-508-229-0806
For more information about special purchase,
rent & lease options, call
For more detailed specifications, visit
www.quadtech.com
CE Marked Impedance Analyzer
HIPOT • LCR METERS • MEGOHMMETERS • MILLIOHMMETERS • DECADES • STANDARDS