Atec Quadtech-2200 - Manual (Page 4)

© QuadTech, Inc. 2009 | Created by QuadCreative Group 12980-en (Rev-1) 0409
Specifications
Performance:
Measurement resolution 0.01 mm
Maximum operating speed 20 m/sec (3937 ft/min)
Cylinder speed range 12-1440 revolutions per minute
Cylinder size range 200 - 2200 mm circumference
Maximum number of controlled units 40
Maximum number of motors 80
System Requirements:
Voltage 110V/220V +/- 10%
Power consumption 2 kVA
Frequency 50 or 60 Hz
Phase Single Phase
Process Technologies:
Scanner sensor type Custom array
Registration mark type Mini Marks Ahead
Environment:
Temperature range 5° C - 50° C (41° F - 122° F)
Maximum humidity 90% Relative Humidity
Interface Capability:
Siemens
ModBus - Tilt and Fit
Pacific Scientific
User Interface:
Type Universal Touch Screen/Keypad
Maximum number of operator control stations 1 or 2 Independent Deliveries
Operating System Microsoft Windows®
Communication means Ethernet
Certifications:
Meets CE Standards
ATEX Approved
Factory Mutual Certified
Options:
Software Length Register Roller Pre-Positioning
Hardware Motorized Bars
Multiple Encoders
Specifications subject to change without notice.
Publication Gravure
QuadTech
®
Autotron ™ Gravure 2200 Register Guidance System
The Americas
United States
+1 414 566 7500 TEL
[email protected]
Europe
France • Germany • Ireland
Italy • The Netherlands •
United Kingdom
+31 294 496222 TEL
[email protected]
Asia-Pacific
China
+86 21 62882525 TEL
[email protected]
India
+91 79 2642 1863 TEL
[email protected]
Tokyo, Japan
+81 48 839 8831 TEL
[email protected]
Osaka, Japan
+81 6 6330 0919 TEL
[email protected]
Singapore
+65 6538 3517 TEL
[email protected]