Atec Fluke-ESA-620 - Manual

ESA620
Electrical Safety Analyzer
•
Superior compliance with multiple standards:
IEC60601:2005, EN62353, VDE 751, ANSI/AAMI
ES1:1993, NFPA-99, AN/NZS 3551, IEC61010
•
Three test loads
•
Expanded leakage ranges through 10,000 µA
•
Dual-lead resistance, leakage, and voltage tests
•
AC only, dc only and true-rms leakage readings
•
100 % and 110 % mains voltage for mains on
applied part (lead isolation) test
•
200 mA and 25 A ac PE test current
•
DSP filter technology for improved accuracy in
leakage measurements
•
20 A equipment current
•
More applied parts selections
•
ECG and performance waveforms
•
Intuitive user interface
•
Easy-to-use applied parts (ECG) connections
•
Insulation posts on applied parts connections
•
Five different insulation tests
•
Varying insulation test voltage
500 V dc and 250 V dc
•
2- or (optional) 4-wire ground wire resistance
•
Optional Ansur plug-in software
•
USB connection
•
CE, C-TICK and CSA for USA and Canada
•
RoHS compliance
•
Designed, tested, and built to incomparable
Fluke quality standards
Technical Data
The ESA620 Electrical Safety Analyzer, featuring
smart technology to enhance productivity under
any standard, represents the next generation in
portable electrical safety testers. With selections of
three test loads, two protective earth test currents and
two insulation test voltages, this versatile device
performs all primary electrical safety tests as well
as several additional leakage tests for premium
standards compliance worldwide.
A convenient 20 A device receptacle broadens
the range of equipment that can be tested using
the ESA620. Standard 2-wire and optional 4-wire
protective earth measurement capabilities offer
first-rate time savings, while new DSP technology
offers better accuracy of leakage measurements
throughout specified ranges.
Equipped with ten unique safety-enhanced
ECG posts, the ESA620 offers simulation of ECG
and performance waveforms so both electrical
safety and basic tests on patient monitors can
be performed with a single connection. When
combined with optional Ansur computer-based
software, the ESA620 allows for test procedure
automation, the capture of results and comparison
to standard limits, printed reports, and total digital
data management.
Key features