Atec Fischer-Cust-Comm-BCICF - Manual

FISCHER CUSTOM COMMUNICATIONS, INC.
Injection Probe calibration fixtures are a part of
the test equipment required by most of the Bulk
current Injection Test Procedure Specifications.
The FCC-BCICF-1 Calibration Fixture allows the
user to quickly and easily calibrate the injection
probe prior to performing the compliance testing.
It exceeds DO-160, Section 20 VSWR fixture
requirements for stand-alone injection probe
calibration fixture.
Due to variable circuit impedances or resonances
in cables and cable looms, the calibration fixture is
used to establish the forward power into the
injection probe needed to develop the specified
currents in the system under test.
FCC-BCICF-1
CALIBRATION FIXTURE
Fischer Custom Communications, Inc.
The FCC-BCICF-1 offers a distinct advantages and benefits.
„ Excellent VSWR over a broad bandwidth: <2:1 over the frequency range of
10kHz – 400 MHz when the probe is in fixture.
„ Accommodates a wide variety of Bulk Current Injection Probes that operate between
10 kHz – 400 MHz..
20603 Earl St., Torrance, CA 90503 · Phone: 310-303-3300 Fax 310-671-6268 · email: [email protected]
Calibrated with probe in fixture
Calibrated without probe in fixture
© Fischer Custom Communications, Inc.
0208DS-FCC-BCICF-1
All rights reserved
• Printed in USA