Atec Fischer-F-203I-A-23mm - Manual

Fischer Custom Communications, Inc.
20603 Earl St., Torrance, CA 90503 • Phone: 310-303-3300 • Fax 310-371-6268 • email: [email protected]
© Fischer Custom Communications, Inc.
600124 All rights reserved • Printed in USA
E
M
I
n
j
e
c
t
i
o
n
C
l
a
m
p
f
o
r
I
E
C
6
1
0
0
0
-
4
-
6
E
d
i
t
i
o
n
4
.
0
RF electromagnetic fields frequently degrade the performance of
electronic equipment by generating common mode currents on
cables. RF immunity to these fields can be verified by injecting
common-mode currents onto the cables of the equipment under
test. The F-203I-A-23mm EM Clamp is an high-efficiency, broadband
clamp-on injection device that is used to test the immunity of
electronic equipment when direct capacitive coupling technique is
not possible nor appropriate. When the F-203I-A-23mm is used with
the F-203I-A-CF3-23mm-150 and the F-203I-A-CF3-23mm-50
calibration fixtures, it fully complies with IEC61000-4-6 Edition 4.0.
Impedance (TOSM / ABCD Transformation)
Decoupling Factor (TOSM / ABCD Transformation)
50
100
150
200
250
300
0.1 1.0 10.0 100.0
Z
[
Ω
]
Frequency [MHz]
-5
-4
-3
-2
-1
0
0.1 1.0 10.0 100.0
a
[
d
B
]
Frequency [MHz]