Atec Fischer Custom Comm_LISN-50-100 - Manual

3
Informative Schematic
Model Number
Frequency
(MHz)
Network
Inductance
Maximum
Current
Voltage
Options Power
Freq.
Number of
Lines
FCC-LISN-50-25-(X)-(XX) .15 – 30 50uH 25A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-50-(X)-(XX) .15 – 30 50uH 50A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-100-(X)-(XX) .15 – 30 50uH 100A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-100-(X)-(XX) .15 – 30 50uH 200A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-400-(X)-(XX) .15 – 30 50uH 400A 240V / 480V DC-60Hz 1
FCC-LISN-50-50-25-(X)-(XX) .15 – 30 50uH 25A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-50-(X)-(XX) .15 – 30 50uH 50A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-100-(X)-(XX) .15 – 30 50uH 100A 240V / 480V DC-60Hz 1, 2, 4
FCC-LISN-50-200-(X)-(XX) .15 – 30 50uH 200A 240V / 480V DC-60Hz 1, 2, 4
For connector options, please see table 3, (xx) defines EUT power connections, (x) defines
number of lines All the models listed above meet the performance requirements for
the 50
, 50uH LISN circuit defined in CISPR 16-1-2, 2006, including the common mode
impedance, phase and decoupling isolation.
Standard 50

LISN for CISPR-16
A wide range of EMC test specifications including CISPR 22, FCC, ANSI C63.4 and many
others use a standard 50
, 50uH and its primary variant the 50, 50uH +5 for conducted
emissions testing. CISPR 16-1-2 most precisely defines the performance requirements of
these devices.