Atec Keytek-series2000 User Manual
Keytek series 2000
Keytek Series 2000
Keytek Series 2000 ESD Simulation System
GENERATORS
z
0 to 25 kV bipolar
z
Plug-in, interchangeable discharge networks for
different human body models
z
Separate simulations for all six key simulation
modes at discharge and its five components
Actual air discharge, plus:
* Current injection of standard waves
* Discharge magnetic field
* Discharge electric field collapse
* Pre-discharge electric field
* Pre-discharge corona-generated RF interference
z
Programmable repetitive operation
z
Interchangeable tips, ball, wedge, point, field
generators
MONITORS
Digital voltage monitor measures and displays
1. Programmed high voltage before high
voltage trigger is depressed
2. Actual, measured high voltage during
charge and after discharge
3. Audible beeper to indicate discharge
Specifications
GENERAL
Voltage Range:
z
1 to 25 kV with Ball Tip (and without Extender
Cable EC-1)
z
1 to 20 kV with Point and Wedge Tips (DT-2, DT-
3)
z
1 to 20kV with Extender Cable EC-1 and any tip
Polarity: Operator-Selectable (plus or minus).
Operating Modes: Single-shot and repetitive.
Repetition Rates: One shot per approximately 1, 3 or 10
seconds.
Built-In Digital Voltmeter: